Kicker turn on lead?

[geowick07 10+ year member]

how do you connect turn on lead to kicker zx300.1 amp? looks like a phone line type connection. here is the link:

http://www.crutchfield.com/S-6iHY65rAcD4/cgi-bin/ProdView.asp?g=208250&id=morephotos&i=700KCKPKG3&pi=8&display=XL#Tab

any advice would be helpful!

thanks!

Click to read more...

 

[john#21 10+ year member]

this is going to seem silly. Look at the other pics on that site and you will find the power connections on the other side with a proper remote.

http://www.crutchfield.com/S-FmgxIFC3DUi/cgi-bin/ProdView.asp?g=208250&id=morephotos&pi=5&i=700KCKPKG3&display=L#Tab

 

[geowick07 10+ year member]

the one that says GND REM +12V? thats the remote turn on ?

 

[psych0ticnemes1 5,000+ posts]

the REM is what you want... it is inbetween the power and ground connections... i have the same amp

 

[geowick07 10+ year member]

ok, how about connecting the sub to the amp.....kicker cvr124 12"......from sub to box actually......the connectors on the sub look almost like rca's, but i assume i am wrong again. how do i connect from the sub to the box?

 

[kickinaudio 10+ year member]

Might want to take that to a shop before you break something.

 

[john#21 10+ year member]

Might want to take that to a shop before you break something.

Truth^^

Judging by the pics I would assume that the little gold colored screw in the speaker connection uses an allen wrench. You insert that into the hole on top of the speaker connection, now look for the hole and go find some allen wrenches.

If that doesn't make any sense, take it to a shop.