Kicker truck box.

[koolwhipman 10+ year member]

It needs to be TRUCK style. Like for a single cap pickup. I would like one or two tens. I like the L5 single they make but don't see too many used one going around. I would also buy one or two shallow round tens and do My own box if need be. Ohm load is variable.

Click to read more...

 

[koolwhipman 10+ year member]

truck boxes......

 

[koolwhipman 10+ year member]

I suppose I am looking for loaded single cap truck boxes, or shallow subs...

I suppose I'm not looking too hard...

 

[vitveet 10+ year member]

I have a pioneer slim mount 10 that I'll do $50 plus paypal fee and shipping! Nice, THIN sub! LMK

V.

 

[MikeTheRed 10+ year member]

Are you looking for subs and boxes, just subs, loaded boxes?

I have two 10" round Q-Logic truck boxes sitting in my closet. I know, they're prefab, but they're yours for $40 + shipping. Mounting depth is I think around 6".

 

[FASTIMES 10+ year member]

i have a single 10 box $15,,

http://www.caraudio.com/forum/showthread.php?t=297606

 

[koolwhipman 10+ year member]

still got my eyes open for whats out there...

 

[benchambers80]

Custom build it, its easy. All you really need is a circular saw and a router with a flush cut rabbiting bit(If you know what i mean.) Drill counter sink and drill bit. Glue screws.

Buy the wood at lows or home depot. Have them do vertical cuts while the board is laying sideways on the machine(again don't know proper terminology).

Cut all 4 peices that way to make your front back top and bottom.(they will all be the same lenght 49")

Also might wanna get the port cut their to if your going ported.

Screw them together and glue, don't forget pre-drill and counter sink.

And for the ends just put a peice of mdf on the end and trace.

Cut outside the line. Screw it down and use the router to make it flush.

If your going ported make sure you make exact measurements. You can use liquid nails to fill up to 1/8 inch.

Gussets are also a good idea, if no cross braces are used.

 

[koolwhipman 10+ year member]

Custom build it, its easy. All you really need is a circular saw and a router with a flush cut rabbiting bit(If you know what i mean.) Drill counter sink and drill bit. Glue screws.
Buy the wood at lows or home depot. Have them do vertical cuts while the board is laying sideways on the machine(again don't know proper terminology).

Cut all 4 peices that way to make your front back top and bottom.(they will all be the same lenght 49")

Also might wanna get the port cut their to if your going ported.

Screw them together and glue, don't forget pre-drill and counter sink.

And for the ends just put a peice of mdf on the end and trace.

Cut outside the line. Screw it down and use the router to make it flush.

If your going ported make sure you make exact measurements. You can use liquid nails to fill up to 1/8 inch.

Gussets are also a good idea, if no cross braces are used.

Well, not to be snippy, but I know very well how to build a box. I built this one.

http://www.caraudio.com/forum/showthread.php?t=298673

I just want to see what is out there for sale.

I VERY much like your idea of the lenth of 49 inches.... thanks for that one.

 

[benchambers80]

I am sure you did but it is just, most boxes I see have the the side or end peices between the front baffle and back peice like this pic. And when making truck boxes those peices are the trickiest to get right.

And I find it much easyier and prettier to just slap a peice on the end and rout it to perfection. Makes the ends nice and flush. It also adds a little bit of air space.

I would build you one but it would weigh a ton.

 

[koolwhipman 10+ year member]

I am sure you did but it is just, most boxes I see have the the side or end peices between the front baffle and back peice like this pic. And when making truck boxes those peices are the trickiest to get right.

And I find it much easyier and prettier to just slap a peice on the end and rout it to perfection. Makes the ends nice and flush. It also adds a little bit of air space.

I would build you one but it would weigh a ton.

Dude.

Seriously.