Kicker Reps.

[Looney_Tune 10+ year member]

What is the sub displacement and XMax on the 12in. CVX? Thanks

Click to read more...

 

[skadude016 5,000+ posts]

15.4mm Xmax

136.8 cu. inches

Kicker's site is rad //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Looney_Tune 10+ year member]

15.4mm Xmax

136.8 cu. inches

Kicker's site is rad //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

I went to kickers site a couple times...guess I didnt look hard enough? Where on the site did u find the info? Also, is 136.8cu. inches the Sub Displacement???? Thought it was suppose to be written as .1??...?

 

[Hintzyboy 5,000+ posts]

You probably have to download the manual from Kicker's site to get all the specs. Can't quite remember. I'd check, but i'm at school and the comps don't have Flash Player installed, and the filters won't let me download it:crap:

 

[Lakota 5,000+ posts]

I went to kickers site a couple times...guess I didnt look hard enough? Where on the site did u find the info? Also, is 136.8cu. inches the Sub Displacement???? Thought it was suppose to be written as .1??...?

136.8 is in cubic inches, so divide it by (12x12x12), which equals 1728.

136.8/1728= .07916.....ft^3.

 

[Looney_Tune 10+ year member]

136.8 is in cubic inches, so divide it by (12x12x12), which equals 1728. 136.8/1728= .07916.....ft^3.

ok preciate that...didnt know all those steps were involved? Thought it always comes in ft^3. So the total displacement for 2 12s would be .16? OZs 12in. ME is .15, is the MEs motor structure that much bigger?

 

[Lakota 5,000+ posts]

ok preciate that...didnt know all those steps were involved? Thought it always comes in ft^3. So the total displacement for 2 12s would be .16? OZs 12in. ME is .15, is the MEs motor structure that much bigger?

I don't know, I just go by the specs given and hope that they're correct