kicker 1500.1

great amp, rated at 2 ohms but can be run down to 0.7 ohms with a good electrical system. Expect around 2300 at 1 ohm and at 0.5 it actaully puts out more power than the zx2500.1 does at 2 ohms. Also strappable with a piece from memphis.hth

 
great amp, rated at 2 ohms but can be run down to 0.7 ohms with a good electrical system. Expect around 2300 at 1 ohm and at 0.7 it actaully puts out more power than the zx2500.1 does at 2 ohms. Strappable with a piece from memphis.hth
really well if i was to go bigger in the future say 2 15 L7's this amp can push them
 
really well if i was to go bigger in the future say 2 15 L7's this amp can push them
yes. i have two 15 Mags off one zx1500.1 at 2 ohms. Strapped at 0.7 they put out around 6000 watts. If you run just one at 0.5 the zx1500.1 pus out around 3000 watts. At 1 ohms expect between 2300-2400 watts.They are not recommended to be run under 1 ohm daily. Even at 1 ohm they draw a lot from what i've been told so you'll need a good electrical system. I personally don't like to run amps under whats recommended by manufacturer because if something were to happen i don't want to be bassless waiting to get my amp fixed. But many have run them at 1 ohm daily successfully.hth

 
great amp, rated at 2 ohms but can be run down to 0.7 ohms with a good electrical system. Expect around 2300 at 1 ohm and at 0.7 it actaully puts out more power than the zx2500.1 does at 2 ohms. Strappable with a piece from memphis.hth
Please explain to me how the zx 1500.1 puts out more power than the zx 2500.1 @ 2 ohms. Last time I check the zx 2500.1 is reated at 2500w @ 2 ohms.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yep, that will mark the third iteration of teh X series. i figured that was in the loop as they have been running out of stock on the last...
11
821
Is this a blue or blue/white wire from the Kenwood? The ACC wire is red and although that should turn on the amp, it is not the prefered wiring...
1
798
low level when using RCAs so that knob should be pushed out. The crossover turn it all the way right and use the one on the head unit and set it...
5
1K

About this thread

senbonzakera

10+ year member
ban him
Thread starter
senbonzakera
Joined
Location
beale afb,ca
Start date
Participants
Who Replied
Replies
24
Views
1,809
Last reply date
Last reply from
t-money
Buick Amp Connector.JPG

maylar

    Jun 2, 2024
  • 0
  • 0
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0

New threads

Top