Kenwood DMX 706S 'NO Signal' error.

[bigron81]

Hello Folks,

Just joined the forum and looking forward to an enriching experience.

Coming to my issue, after much deliberation bought the Kenwood DMX 706s.
However, using the AV IN input via the Kenwood CA-C3AV cable connected to a HDMI to RC convertor and into mu phone through a usb c to hdmi, I get a ' no signal' error on screen. I know the usb c-hdmi cable and the hdmi convertor works because it can output on to my TV at home through my phone.

Any settings I need to change or probable causes I can look at.
Looking forward for your views. Thanks in advance.

Click to read more...

 

[bigron81]

Okay, so I managed to get audio. The video is not being mirrored to the screen and gives the 'No Signal' error.
Do I ground the green parking brake wire of the HU?

 

[Gento8]

Okay, so I managed to get audio. The video is not being mirrored to the screen and gives the 'No Signal' error.
Do I ground the green parking brake wire of the HU?

Did you ever find a solution? I am havng the same issue.

 

[ThxOne Premium Member]

Okay, so I managed to get audio. The video is not being mirrored to the screen and gives the 'No Signal' error.
Do I ground the green parking brake wire of the HU?

Well if you do ground the green wire, here is exactly how mine is grounded on my 706S. I have no issues watching videos at anytime.