Kenny's valance and rollpan

[dbornotdb 10+ year member]

 

Todays episode saw me fixing a hanging valance that was held up with drywall anchors. //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

I didn't take pics of them either.

But some homemade brackets and a few bolts has it fitting securely now.

 

Click to read more...

 

[dbornotdb 10+ year member]

Opened up a box and this was inside.

 

[dbornotdb 10+ year member]

Gonna cut and install it here.

 

[dbornotdb 10+ year member]

Frame cut.

 

[dbornotdb 10+ year member]

This is what you remove.

 

[dbornotdb 10+ year member]

Test fitting.

 

 

Since I was doing this alone, and it wasn't easy alone, I used the tape to mark where I liked it since it is 3 pieces. That way when I got it off, line the tape up and secure it together.

 

[dbornotdb 10+ year member]

Screw it together at the flanges inside.

And then glue it together at the seams and flange.

 

[dbornotdb 10+ year member]

Then I used a 36 grit Rol-Loc disc and prepped the surface for the liquid plastic.

Said plastic.

 

[dbornotdb 10+ year member]

Seam filled.

 

[dbornotdb 10+ year member]

Sanded that down..... no pics....... then added some filler over that.

 

[dbornotdb 10+ year member]

Blocked that down smooth and packed up. It was time for "24" to be on.

 

[Dalton]

Looks good, keep going and post post pics of final.

 

[NeverEnuffBass 10+ year member]

Gonna fill where the plate goes on the roll pan?

 

[dbornotdb 10+ year member]

DA sander, 180 grit.

 

[dbornotdb 10+ year member]

Don't need this.