Keep Blowing Main Power Fuse

[BrokenSilence1 10+ year member]

I Have 2 Mono Block Kenwood 7202s And Single Alpine Type Rs On Each And The Main Fuse Keeps Blowing Does Anyone Have A Wiring Diargram On Wiring To Amps So I Can Figure The Problem Out

Click to read more...

 

[dleccord 5,000+ posts]

any specs on the amp? and what load is each amp seeing? how big is your power line? fuse size?

 

[JeremiahCoffel 10+ year member]

Possibly trying to be pulling WAY too much power through the power line. Get a bigger size power line and a good distro block maybe?

 

[Lakota 5,000+ posts]

any specs on the amp? and what load is each amp seeing? how big is your power line? fuse size?

That info would be a good start.

 

[blackbonnie 5,000+ posts]

x3 on the specs, then we will be able to help you out alot better

 

[BrokenSilence1 10+ year member]

I HAVE 4 GUAGE WIRE 60 AMP FUSE EACH AMP IS 980 WATTS (BRIDGED AT 480 RMS) THE AMPS HAVE A MONO AND STEREO SETTING. aND THE TYPE RS ARE 500 WATTS RMS

 

[BrokenSilence1 10+ year member]

Anybody?

 

[blackbonnie 5,000+ posts]

is your fuse under the hood 60 amp? if so how many amp fuses are on your amps?

 

[dleccord 5,000+ posts]

just use an 150amp fuse in your main power wire. and use some punctuations next time.

 

[BrokenSilence1 10+ year member]

just use an 150amp fuse in your main power wire. and use some punctuations next time.

wont that brn up the wires?

 

[blackbonnie 5,000+ posts]

wont that brn up the wires?

it shouldnt with what your running. what are your fuses rated at on your amp???