jl audio 10W3v2 D2

[killahsharksjc 10+ year member]

i have a jl audio 10W3v2 D2 and one day it stoped working. so i took it out thinking maybe the wire fell off. well the wire was still connected. so i tried hookin up one side (voice coil) and the sub works . when i hook up the other side it doesnt work. well i hooked up just the one side and put it back in the box, powered it to a 250/1 and the sub sounds normal. i know one of the coils is gone but what i want to know is how will the sub handle with just one coil. It sounds good even with a good two hours of pounding. and also is it safe for my amp???

Click to read more...

 

[bhsswrstlr 10+ year member]

you cant just hook up one coil...to have it engage properly you need both coils hooked up. but first get a multi-meter out, check for continuity on the coils. if you get a tone of any sort, your coils have melted together

 

[killahsharksjc 10+ year member]

since the last time I posted the sub still knocks hella hard. i bump it for long periods and it sounds good. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif