mikey7182 10+ year member
CarAudio.com Elite
With the impending arrival of our second child, it has come time to get rid of my S-10. I have uninstalled all my gear and will be retaining a good portion of it for my new car, but will not have a need for this beast of an amp. Most people know what this is, but for those who don't, it was a joint effort between JBL and Crown. It is technically a 2 channel amp, and can be run in stereo, parallel, or bridged/mono configurations. It will do 2kw+ (most likely closer to 3kw) anywhere between 1-4 ohms, giving you tons of flexibility with wiring configurations. It is EXTREMELY efficient, not nearly as taxing on the electrical as other comparable amps I've used. It runs cool for hours and seems to have endless power on tap. In my install, it powered 3 JBL W15GTi MKII with a nominal 4 ohm load and a DEH-P01 at the helm. It never saw below 12V and was not abused. I'd rate it at 10/10 functionally, and 8.5/10 cosmetically. It has a few light surface scratches on the plexi, but nothing that couldn't be buffed out. It also has a small piece missing from one corner of the mounting feet, but it does not interfere with the mounting point and all 6 points are still secure. The amp has dual 4AWG inputs for both power and ground. I have quite a bit of wire left over from my install, so I will include a 15-20' run of 1/0AWG, a Kicker fused distribution block that is a single 1/0 in, single 1/0 out and 2 4AWG out, as well as 10-12' of 4AWG. Asking price for the amp plus the extras is $625 shipped/insured/fees OBO in the lower 48. If you don't need any of the wire or distro block, I can do $575 shipped OBO. Please feel free to PM/email me at mikey7182@gmail.com with any questions. No trades needed at this time; just cash. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Here are a few pics:
with my two PX300.4:
I would also consider parting with one of the PX300.4 if there is any interest for $175 shipped/insured/fees OBO. It is rated at 123.5x4@4 ohms stereo, 358x2@4 ohms bridged. It perfectly matches the BPX. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Thanks for looking.
with my two PX300.4:
I would also consider parting with one of the PX300.4 if there is any interest for $175 shipped/insured/fees OBO. It is rated at 123.5x4@4 ohms stereo, 358x2@4 ohms bridged. It perfectly matches the BPX. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Thanks for looking.