Jasper JIG Manual??

[Glock23 10+ year member]

I need the 10 page manual.. if anyone has it. I had my father try to help me set it up (he's a very very smart guy) and we still couldnt get it.

Click to read more...

 

[JimJ 5,000+ posts]

What can't you figure out? It bolts to the base of the router...you look on the guide and see what size hole you need, and use that hole as a center pivot point for rotating the router around...

 

[tRidiot 10+ year member]

Mine didn't come with a manual, just the instructions on the cardboard packaging. And I bought the $60 dual set. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Glock23 10+ year member]

yeah i also bought the $60 dual set.. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif i have a skil 1823 and the holes arent linen up...

 

[tRidiot 10+ year member]

yeah i also bought the $60 dual set.. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif i have a skil 1823 and the holes arent linen up...

I think that's the saw I've got, too... it took a while, but I figured out I had to pull off the black acrylic base from the saw to get it to work. The jig essentially replaces the black portion of the base. Not the way it's supposed to work, but it does...

 

[CrazedCat 10+ year member]

Which model jig are you using? The instructions are on the back of the cardboard packaging it comes wrapped in. They tell you how to calculate for the pivot hole to use depending upon if you're doing an inner or outer cut. Also depends if you're using a 1/4" or 1/2" bit.

 

[ebrunn 10+ year member]

yeah, you gotta take the base off first. Then just put the jig on and rotate it around intill the holes line up. It takes a minute or two to do get it right cause theirs alot of hole patterns.

 

[Glock23 10+ year member]

we got it! thanks guys.. the directions on "the package" if you can call it that was confusing..