I'll be ordering some 18" Fi softparts for my 05 XXX within the next couple of days. My plans for a box is somewhere around 7.5-8 tuned to 33-34hz. This will be in a 1980 4 door chevette.//content.invisioncic.com/y282845/emoticons/fro.gif.c695f1f814b01c4ad99fe7f8cccadd29.gif If I cant fit atleast 7 cubes after displacement in the actual hatch area, I'll fold down the seat down and go with 8-8.5 after displacements.Might as well go bigger if I have to fold the seat down anyway. //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif All I have for power at the moment is a zx750.1 that will be running at 1 ohm. It should give me around 1100-1200 watts. I'll upgrade the amp after I get some other shit settled. I have a question on port area for this sub...how much should I go with? I've did a little research and most seem to go with 95-110 sq inch. So I think I should do atleast 95 sq inches? How many 4" aeros would it take for a 7.5-8 cube box to get enough port to not get any noise? I'll post a log as go along. I have alot of work to do to my vehicle...it should get loud though. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Any suggestions are comments are appreciated.
