Is this imp. possible?

[IDSkoT 5,000+ posts]

I have 2 2-Ohm DVC subs wired in... ****. I forget what, honestly. My question is, is it possible for them to be wired to 2-ohms?

On the sheet that came with the subs it says 'Normal Impedance: 1 or 4 Ohms"

I mean, my subs are working and all... but I'm honestly not sure what the ohms is. I tried using my DMM-- but apparently you can't do that when listening to music.

I think in series 1 + 1 = 2, right? Or is series 4+4 = 2? I don't remember //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Click to read more...

 

[Mitch86 5,000+ posts]

You can wire each sub to 4 ohm and then wire them together at 2. I dont know wether it's series or parellel though... google rockford wiring wizard it'll show you how to wire them to a 2 ohm load.

 

[ThatChevyGuy 5,000+ posts]

wire them series then parallel to the amp

on each sub run a jumper from + _ then run the remaining + _ to the box or amp.

 

[2fnloud 10+ year member]

wire each subs V/C in parallel that is make each sub 1 Ohm. Then wire the two subs togather in series that will make the Ohm load 2 Ohms total.

 

[Scoobydoo 5,000+ posts]

or

series the subs, then parallel them to the amp

 

[Nova76 10+ year member]

follow this and your good for 8ohm, 2ohm, and .5ohm

http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=2&woofer_imp=3

 

[bk12321 10+ year member]

follow this and your good for 8ohm, 2ohm, and .5ohm
http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=2&woofer_imp=3

8 ohm is just series series

2 ohm is series parallel or parallel series

.5 is parallel parallel

there u go