I'm looking to spread the word about True Bass Solutions. To do so I'm selling them for next to nothing
. I guarantee you'll love the quality and sound. Each sub is made by hand here in the USA by Dana Audio out of Tennessee. Message me if you have any questions or to place an order.
Video of the 2nd gen in action http://www.realmofexcursion.com/videos/TrueBass/ultimate8.1.wmv
Ultra 8's are rated for 250rms and 2K burps up to 3 sec, dual 2 and dual 4 available. Specs are as followed
Re = 3.4298 ohms
Fs = 37.3410 Hz
Zmax = 46.4751 ohms
Qes = 0.3413
Qms = 4.2834
Qts = 0.3161
Le = 2.2975 mH (at 1 kHz)
Diam = 155.0000 mm ( 6.1024 in )
Sd =18869.1914 mm^2( 29.2473 in^2)
Vas = 10.5085 L ( 0.3711 ft^3)
BL = 14.3582 N/A
Mms = 87.4380 g
Cms = 207.7628 uM/N
Kms = 4813.1816 N/M
Rms = 4.7893 R mechanical
Efficiency = 0.1506 %
Sensitivity= 83.7971 dB @1W/1m
Ultra 10's are D4 only and rated for 600rms and 3K burps up to 3sec, specs are as follows
Re = 6.2638 ohms
Fs = 34.4071 Hz
Zmax = 139.8793 ohms
Qes = 0.2495
Qms = 5.3222
Qts = 0.2383
Le = 4.1471 mH (at 1 kHz)
Diam = 206.3750 mm ( 8.1250 in )
Sd =33450.6109 mm^2( 51.8486 in^2)
Vas = 29.1322 L ( 1.0288 ft^3)
BL = 25.1720 N/A
Mms = 116.7464 g
Cms = 183.2737 uM/N
Kms = 5456.3213 N/M
Rms = 4.7422 R mechanical
Efficiency = 0.4469 %
Sensitivity= 88.5199 dB @1W/1m
Sensitivity= 89.5824 dB @2.83Vrms/1m
8's sound good in enclosures from .7 - 1cubic ft tuned from 33-40Hz
10's sound good in 1-1.5 cubic ft tuned from 32-35Hz
They will not work in sealed enclosures, or 4th order BP, Ported and 6th order only for decent sounding applications.
Any member that has one of these subs; feel free to let everyone know what they are missing. Thanks
Shouts out to Audio_phil for the "accurate" specs
Video of the 2nd gen in action http://www.realmofexcursion.com/videos/TrueBass/ultimate8.1.wmv
Ultra 8's are rated for 250rms and 2K burps up to 3 sec, dual 2 and dual 4 available. Specs are as followed
Re = 3.4298 ohms
Fs = 37.3410 Hz
Zmax = 46.4751 ohms
Qes = 0.3413
Qms = 4.2834
Qts = 0.3161
Le = 2.2975 mH (at 1 kHz)
Diam = 155.0000 mm ( 6.1024 in )
Sd =18869.1914 mm^2( 29.2473 in^2)
Vas = 10.5085 L ( 0.3711 ft^3)
BL = 14.3582 N/A
Mms = 87.4380 g
Cms = 207.7628 uM/N
Kms = 4813.1816 N/M
Rms = 4.7893 R mechanical
Efficiency = 0.1506 %
Sensitivity= 83.7971 dB @1W/1m
Ultra 10's are D4 only and rated for 600rms and 3K burps up to 3sec, specs are as follows
Re = 6.2638 ohms
Fs = 34.4071 Hz
Zmax = 139.8793 ohms
Qes = 0.2495
Qms = 5.3222
Qts = 0.2383
Le = 4.1471 mH (at 1 kHz)
Diam = 206.3750 mm ( 8.1250 in )
Sd =33450.6109 mm^2( 51.8486 in^2)
Vas = 29.1322 L ( 1.0288 ft^3)
BL = 25.1720 N/A
Mms = 116.7464 g
Cms = 183.2737 uM/N
Kms = 5456.3213 N/M
Rms = 4.7422 R mechanical
Efficiency = 0.4469 %
Sensitivity= 88.5199 dB @1W/1m
Sensitivity= 89.5824 dB @2.83Vrms/1m
8's sound good in enclosures from .7 - 1cubic ft tuned from 33-40Hz
10's sound good in 1-1.5 cubic ft tuned from 32-35Hz
They will not work in sealed enclosures, or 4th order BP, Ported and 6th order only for decent sounding applications.
Any member that has one of these subs; feel free to let everyone know what they are missing. Thanks
Shouts out to Audio_phil for the "accurate" specs
