installing my 3 subs

[dennisthamenace 10+ year member]

then look into hifonics bx or bxi series, and power acoustik

 

[sonyxplod 10+ year member]

then look into hifonics bx or bxi series, and power acoustik

f*ck that....just name the best **** amps you know for my 3 subs....then let me decide on my budget

 

[dennisthamenace 10+ year member]

with that attitude i dont think i want to help you anymore //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[dennisthamenace 10+ year member]

oh and p.s. sony xplods are p.o.s

 

[Blazin_Jason 10+ year member]

so what would be better than my amp??....suggest one

anything

That's better.

 

[phyphoestilic 5,000+ posts]

well ur sub's are 380rms each, look up the Hifonics Bxi1606D. That should be good

 

[dennisthamenace 10+ year member]

That's better.

x2

 

[sonyxplod 10+ year member]

childish...thanx for yalls help though....i'll look into yall suggestions

 

[dennisthamenace 10+ year member]

np

 

[Blove1991 10+ year member]

Buy this amp for 200 bucks

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14803

Wiring your subs like this

Your 3 subs can only take 1,140 RMS all together, and when you wire your subs this way it will give that amp an 1.34 ohm load, and that amp will push around 1,100 watts at a 1.34 load? Which will be plenty for them subs.

Correct me if im wrong //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[sonyxplod 10+ year member]

this is how im installing my subs today.....

 

[Blazin_Jason 10+ year member]

this is how im installing my subs today.....

That's pretty much the best way to do it man

 

[sonyxplod 10+ year member]

this is how im installing my subs today.....

well i installed like this and it works fine.....nice bass...but only probablem is that every loose part in my car rattles like a snakes tail....help

 

[acold7dusta 10+ year member]

each channel is ran at a different impedence how you have it //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

and to stop rattles, what car is it? deadener will help a whole bunch, and so will foam between 2 metal pieces that clank

 

[acold7dusta 10+ year member]

you could also wire it in series parallel and bridge the amp

edit: no you cant, you'd need another woofer