installing amp

1. run power wires - leave fuse out until last!

2. connect ground wire to chasis

3. Run RCA's and remote wire from HU to amp - do not connect RCA's yet

4. Connect remote wire

5. connect ground wire

6. connect power wire

7. run speaker wire/connect to amp

8. Connect RCA's

9. put in fuse

Make sure you scrape your grounding spot free of paint and connect it sturdilly.

Also make sure that all the wires are attached firmly so they don't short out

That website up there is good too, also there is good info on http://www.bcae1.com

 
1. run power wires - leave fuse out until last!2. connect ground wire to chasis

3. Run RCA's and remote wire from HU to amp - do not connect RCA's yet

4. Connect remote wire

5. connect ground wire

6. connect power wire

7. run speaker wire/connect to amp

8. Connect RCA's

9. put in fuse

Make sure you scrape your grounding spot free of paint and connect it sturdilly.

Also make sure that all the wires are attached firmly so they don't short out

That website up there is good too, also there is good info on http://www.bcae1.com

Disconnect the negitive terminal on your car first (battery)

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

almo181

10+ year member
Juggalo
Thread starter
almo181
Joined
Location
Sasktoon (been there for 2 months)
Start date
Participants
Who Replied
Replies
11
Views
1,392
Last reply date
Last reply from
almo181
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top