Installation Insight Needed

[shady]

Ok. First off, I have a '92 Toyota Pickup SR5 Extended Cab.

I have a 500W 2-channel Kenwood Amplifier that I bought a few years ago.

I have been doing a little browsing for speakers and I think I have found the two sets that I want to install. In the back, I would like to put in rockford fosgate 6 x 9 3-ways (T1693C is the product number) they have an RMS of 110W and a peak of 220W. I know that I'll either have to buy a box or custom fit them.

In the front, I was thinking of putting Rockford Fosgate 4" T142C's. They only have an RMS of 40W and a peak of 80W.

I was wondering if I should hook the two 6x9's to the amp and the 4 inchers to the head unit because of their low RMS, or if I should hook them all up to the amplifier.

Any help or insight would be appreciated.

-shady

Click to read more...

 

[jsloan10 10+ year member]

You could run them off the deck but the rear fill is going to overpower your fronts.

 

[shady]

is there any other way I could hook them up so the back doesnt overpower the front?