Installation Help

[yellowta 10+ year member]

Ok, so I have a JBL GTO535 5 channel amp, JBL P1022 2 ohm 10s (2), and changing out my components in the doors and back seat on my '02 TransAm. Also new JVC KD-A505 head unit. What is the best way to wire everything up so I get the most power to the subs and have ample power to run the other speakers as well??

Click to read more...

 

[yellowta 10+ year member]

anyone?

 

[fasfocus00 5,000+ posts]

you might want to try (+) on the speaker to (+) on the amp and (-) on the speaker to (-) on the amp.

 

[yellowta 10+ year member]

really? i was being more specific in regards to running the subs on 1 channel, something about in series...i really am not sure, so I was trying to get an idea...

 

[bubbagumper6 5,000+ posts]

Ok, so I have a JBL GTO535 5 channel amp, JBL P1022 2 ohm 10s (2), and changing out my components in the doors and back seat on my '02 TransAm. Also new JVC KD-A505 head unit. What is the best way to wire everything up so I get the most power to the subs and have ample power to run the other speakers as well??

Your looking for a sponsor and you don't even know how to wire an amp?

...good luck! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[yellowta 10+ year member]

i see knowledge is not a shared trait here i guess...

 

[nineball 10+ year member]

your amp is not powerful enough to drive both subs. wire one of them in series and connect it to the sub channel. that is the best possible result you can have.