Sold Infinity Amplifier 1210d --- 1300Wrms @ 2ohm

[l_spade 10+ year member]

Hey guys. I bought this amplifier off of cardomain about 10 months ago. First I ran two 10" eclipses, then one 10" orion (was temporary), and after that two 15" kicker cvr's (the cvr's are also for sale on this forum). It got its signal from a kenwood eXcelon head unit (5v pre outs) and I had 15 feet of 0 gauge to a distribution block and then 3 feet of 4 gauge to the amp with a 4 gauge ground. I treated this amp very nicely and never went over 3/4 volume on the HU (signal starts to distort after 3/4 volume). Here are the specs:

QUOTED OFF OF THE INFINITY WEBSITE

Specifications

CEA Rated: Yes

Power Output: 854 watts RMS x 1 channel at 4 ohms and ≤ 1% THD + N 1300 watts RMS x 1 channel at 2 ohms, 14.4V supply and ≤ 1% THD + N

Signal-to-Noise Ratio: 72 dBA (reference 1 watt into 4 ohms)

Dynamic Power: 1516 watts at 2 ohms

Effective Damping Factor: 6.357 at 4 ohms

Frequency Response (-3dB): 17Hz to 302Hz (-3dB)

Maximum Input Signal: 5.7V

Maximum Sensitivity: 260mV

Output Regulation: .132 dB at 4 ohms

MSRP U.S. $: $574.95

I am selling this because I am starting to compete in spl contests and I got a killer deal on an amp from a close friend in canada. If you want to know more about me visit canadiancaraudio.com and ask around about me, I am well known on that forum.

I am selling this amplifier for $260 shipped. If ya have any other questions just ask, pm me, or email me at xianlogan@hotmail.com.

Thanx for looking //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif.

Click to read more...

 

[l_spade 10+ year member]

TTT

Going on ebay soon.

 

[Chester504 10+ year member]

Interested...do you have a footprint?

 

[l_spade 10+ year member]

Ok, I think I am going to feel dumb when I ask this //content.invisioncic.com/y282845/emoticons/slap.gif.87520e8ca8e90076ac30e777c0de5331.gif but what is a foot print?

 

[Lckmyblls 10+ year member]

Length x Width x Height

 

[Chester504 10+ year member]

No need to feel stupid. I could have said dimensions instead of using jargon. I looked it up on the intraweb anyways, thanks.

 

[l_spade 10+ year member]

Ok, got it. Let me know.

 

[brock86gn 10+ year member]

Would these power two 12'' type r's good?

 

[l_spade 10+ year member]

whats the ohm ratin on those type r's???

 

[MisterGrubbs 5,000+ posts]

A friend of mine is looking for an amp to push is 13w7, I may be sending him your way depending on what I can talk him into buying

It's a Dual 1, I figure he'll get close to 1100 at 3ohms, send me a PM with the best you can do bro, shipped to 30263. He's a local friend and trusts me with finding crap like this lol