I wonder...

[GAM3OVR 5,000+ posts]

What the loudest 200 RMS subwoofer there is? It need to have a final impedence of 2 ohm.

I just bought a 93 Subaru wagon as a daily driver, due to the fact gas prices are ****nig crazy and look to add a little bass. I got a 200 RMS amp lying around I don't need. It's old but it works and I'm thinking what the loudest 200 RMS Subwoofer you guys can think of. I'ma build the box with 5/8mdf to conserve weight.

Any input would be nice. Thx mates.

Click to read more...

 

[GAM3OVR 5,000+ posts]

don't matter what size or what box specs are needed. its a wagon it has space

 

[DaGh0st 5,000+ posts]

snag a cheap 18" off of mach5

 

[baAB2436M]

no don' get an 18, if you're looking for a little bass like you said, get a couple of nice 10's or maybe a 12, that should work well with your 200 watt amp.

 

[ultimate157 5,000+ posts]

no don' get an 18, if you're looking for a little bass like you said, get a couple of nice 10's or maybe a 12, that should work well with your 200 watt amp.

Oh yea, spreading 200wrms over a bunch of subs will be very nice.

Get a Mach 5 MJ-18, throw it in an over sized ported enclosure. I bet that will do you just fine.

 

[Louisiana_CRX 5,000+ posts]

a pair of Funky Pup 12's would be pretty sweet .....on that set up...

 

[lil_italy773 10+ year member]

hifonics has cheap but decent 12 in sub that 300wrms, kicker comps the yellow stiched ones in a sealed box would be able to handle 200wrms.

 

[lil_italy773 10+ year member]

a pair of Funky Pup 12's would be pretty sweet .....on that set up...

sorry i bought the last 2 they have to use in my bass race skool bus:laugh:

 

[kovemaster559 5,000+ posts]

snag a cheap 18" off of mach5

x2

 

[skylineTT 10+ year member]

a CVR or 2 comps would be okay on 200W

 

[BEAVER.989 10+ year member]

IDQ12 ported. Very sensitive and responds well to lower power levels.

 

[andrewmoore13 10+ year member]

JL w0's or w1's will sound good off 200.

 

[GAM3OVR 5,000+ posts]

JL w0's or w1's will sound good off 200.

not looking for sq. I just want it to bang as loud as possible for 200 RMS. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[GAM3OVR 5,000+ posts]

problem on the mach 5 18" its either single 4 or 8 ohm, and I need a 2 ohm load for 200 RMS.

 

[GAM3OVR 5,000+ posts]

a pair of Funky Pup 12's would be pretty sweet .....on that set up...

just looking for a single sub. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif thx thou