i want to spend 100$-150$

[DejaWiz 5,000+ posts]

RSd12 on 700-850w rms

 

[alpinetypeR 10+ year member]

check out a kicker cvx 10.. those bump pretty good for 10s if you have the right amp.

eh no.

i dont want your average- i can just get that at BBY or CC sub...

i want something unique...

 

[alpinetypeR 10+ year member]

https://ssl.perfora.net/www.ficaraudio.com/sess/utn;jsessionid=1547557bbc5a1d3/shopdata/0030_SSD/product_overview.shopscript
I still dont know how you think youre gonna get a single 10" to sound louder than two 12" subs.

i never said i was GOING to it make sound liek that...

i was usuign ti to make a statement...

i want a 10 that will hit deep like 2 12's would... i dont have the space for 2 12s...well i do but i dont want t waste space if i dont have to ...

do you kinda get where im comign from?

 

[Twilight 10+ year member]

If you want "deep" you need to build your own box, probably ported, tuned low. No prefab box will give you what you're looking for. With the right box you can make any sub sound like anything (well, within reason).

If you want a unique sub I would take that guy up on the SI or MMATS. There have been other good suggestions here, PG RSd etc.

 

[alpinetypeR 10+ year member]

If you want "deep" you need to build your own box, probably ported, tuned low. No prefab box will give you what you're looking for. With the right box you can make any sub sound like anything (well, within reason).
If you want a unique sub I would take that guy up on the SI or MMATS. There have been other good suggestions here, PG RSd etc.

w\i plan on making my own box.

im looking to buy new subs not used. but if the deal is good enough why not.

 

[RipDaJacka]

I still say a AQ sd2.5, DD 1500... then Fi SSD

 

[alpinetypeR 10+ year member]

I still say a AQ sd2.5, DD 1500... then Fi SSD

what do you use?

 

[RipDaJacka]

My Equip is in my sig brotha.. no single sub i have ever heard is near my 9515G.. not saying that its the Be all End All, but in this area its pretty much the shit (along with my friends' DD multi-sub systems built for SPL)

I would reccomend you the HDC3 but its $200+ and needs at least 1500W to get full potential

 

[alpinetypeR 10+ year member]

My Equip is in my sig brotha.. no single sub i have ever heard is near my 9515G.. not saying that its the Be all End All, but in this area its pretty much the shit (along with my friends' DD multi-sub systems built for SPL)
I would reccomend you the HDC3 but its $200+ and needs at least 1500W to get full potential

very nice. i 99% sure the AQ is what ill buy.

i cant do more then 500RMS i dont know if my alternator will be able to handle more then that.

do you think that this amp will be sufficient?

http://www.bestbuy.com/site/olspage.jsp?skuId=8226582&type=product&id=1166840602693

 

[RipDaJacka]

yeah that looks like a nice amp man.. but it is only 2ohm stable, keep it if u already got it

... if you decide 2 run 2 subs in the future then you will need a new amp...keep that in mind

you could also look into getting a Hifonics 1206D

1200 @ 1ohm

900 @ 2ohm

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16367

^^^can be found cheaper on other sites tho

 

[Trey803 5,000+ posts]

Im gettin a 10" fi q puttin 1200 watts to it and Im sure it will be louder than some of my freinds 2 12's. Plus with 26mm of excursion it should be a low end BEAST

 

[alpinetypeR 10+ year member]

Im gettin a 10" fi q puttin 1200 watts to it and Im sure it will be louder than some of my freinds 2 12's. Plus with 26mm of excursion it should be a low end BEAST

thats what i want!

but...my electrical system would fry up

 

[RipDaJacka]

It will only be a low-end beast if the box is properly built and tuned.. you will prolly wanna do 32hz.. im at 41hz so i got a higher tuned meter beater setup, altho im sure it would get wicked if tuned down low

what kinda electrical u got?? 1200 will be ok on most electrical systems

 

[alpinetypeR 10+ year member]

It will only be a low-end beast if the box is properly built and tuned.. you will prolly wanna do 32hz.. im at 41hz so i got a higher tuned meter beater setup, altho im sure it would get wicked if tuned down low
what kinda electrical u got?? 1200 will be ok on most electrical systems

stock 91 integra stuff

right now i have

4 awg power wire ran to a dizzy block

splits off to 8awg

one lead goes to 501x that runs fronts and rears...

other lead goes to a 25$ dual amp (does the job quite nicely) powering 6x9 (RF good mid bass)

im going to disconnect the dual amp and run the 6x9 off the rear channel of the 501x then im going to take the rear 6.5 and push them off the deck. keeping the fronts amped.

the 8103d will be pushing th Audioque 12 in a custom box. @ 500rms or abouts.

hopefully my lights wont dim to much

 

[RipDaJacka]

should be ok, we'll see tho