i need a genius with

[tommyk90 5,000+ posts]

Originally posted by paikiah marshall, you should learn to use WinISD pro man...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

You can also calculate what the ssf level needs to be on winISD by checking the cone travel and if it goes over peak to peak xmax, that's where you need to have a ssf.(Maybe a little higher, to be safe.. dunno if the ssf cuts off at a steep slope or not, so...)

How come my winisd pro doesn't show anything when i select cone travel?

 

[paikiah 5,000+ posts]

Originally posted by tommyk90 How come my winisd pro doesn't show anything when i select cone travel?

probably cause you didn't input power values.

You got to input the numbers to know port velocity as well.

 

[tommyk90 5,000+ posts]

Originally posted by paikiah probably cause you didn't input power values.

 

You got to input the numbers to know port velocity as well.

Well, i put all of the number i could off of the RE site, but do i need more than those numbers?

 

[paikiah 5,000+ posts]

Originally posted by tommyk90 Well, i put all of the number i could off of the RE site, but do i need more than those numbers?

You need to know the power that your amp is going to send to your subs.

go to the "signal" tab... there, you will see W. that is where you input your amp watts. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[tommyk90 5,000+ posts]

Originally posted by paikiah You need to know the power that your amp is going to send to your subs.

 

go to the "signal" tab... there, you will see W. that is where you input your amp watts. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Alrighty. Put in 1200 watts, still got nothing.

EDIT: I think it's because i don't have all the parameters. I did the same thing with the L7 in the program and everything works.

 

[paikiah 5,000+ posts]

Originally posted by tommyk90 Alrighty. Put in 1200 watts, still got nothing.

 

EDIT: I think it's because i don't have all the parameters. I did the same thing with the L7 in the program and everything works.

yeah, I think that should be it...

 

[actlsub 10+ year member]

Originally posted by paikiah marshall, you should learn to use WinISD pro man...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

You can also calculate what the ssf level needs to be on winISD by checking the cone travel and if it goes over peak to peak xmax, that's where you need to have a ssf.(Maybe a little higher, to be safe.. dunno if the ssf cuts off at a steep slope or not, so...)

peak to peak xmax, i thought it was one way