I have 1 shiva and an 880w amp - HELP

  • 3
    Participant count
  • Participant list

Insomniac119
10+ year member

i can't sleep
I sold my RE SX because I needed the money. I want to put my adire audio shiva 12" in it's place.

The amp that powered the SX is 880watts rms @ 4ohms (two channels). I believe the shiva is 8ohm dual coal, so if I ran it in parrallel it'd be 4 ohms.

How should I wire this thing up? Will the shiva be able to handle all 880 watts without exploding? Should I just give it one channel?

 
Run the Shiva in parallel like you said, but when you go to set the gains, use a lower value. 500W should be plenty. 800+ on one is just excessive.

Heck, mine gets loud with ~250W...

 
you said its a two channel. what are your amp specs? you gave us the 880 @ 4 ohm, but what are full amp specs, and what model sub is it?
Soundstream XTA880.2 - Soundstream Xstream 2 Ch. 880 Watt Amplifier

http://www.woofersetc.com/index.cfm?fuseaction=product.display&product_id=571

No. OF CHANNELS: 2

OUTPUT (watts):RMS @ 4 Ohms 220X2

RMS @ 2 Ohms 440X2

T.H.D.: 0.05%

FREQ. RESPONSE (Hz): 10 - 30k

SIGNAL TO NOISE RATIO: >96dB

DAMPING FACTOR: >200

INPUT SENSITVITY: 200mv

CROSOVER SLOPES: 12dB

CROSSOVER FREQUENCY: High-Pass(Hz) 30 - 500

Low-Pass(Hz) 30-150

SUBWOFFER EQ: 0 - 18dB

DIMENSIONS (INCHES): 26.8x12.4x3

it doesn't say in the website, but the owner's manual says 4ohm bridged is 880watts.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
205
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
457
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
396
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
453

About this thread

Insomniac119

10+ year member
i can't sleep
Thread starter
Insomniac119
Joined
Location
Wichita, KS
Start date
Participants
Who Replied
Replies
5
Views
421
Last reply date
Last reply from
Insomniac119
Screenshot_20240523-151806.png

1aespinoza

    May 23, 2024
  • 0
  • 0
1716436519534.png

Doxquzme

    May 22, 2024
  • 0
  • 0

New threads

Top