skylineTT
10+ year member
bass=sekz
im trying to figure out why its shutting off. its kenwood that i got from snoopysnooper. everything works fine when the car is off but when i turn it on, it just cuts out and makes noises in the speakers.
the car has a built race motor with a big cam and everything and idles pretty low and choppy but has a 200A alty and all electrical work done. i thought that maybe i had too many things wired up to the radio turn on wire (only like 15 amps or something of fusing on it) so i was going to route the ignition turn on wire from the head unit to a fat ignition wire under the breast plate. im also going to turn the idle up a tad to make sure its not getting voltage drop. is my thinking correct? is there anything else i should try? thanks
the car has a built race motor with a big cam and everything and idles pretty low and choppy but has a 200A alty and all electrical work done. i thought that maybe i had too many things wired up to the radio turn on wire (only like 15 amps or something of fusing on it) so i was going to route the ignition turn on wire from the head unit to a fat ignition wire under the breast plate. im also going to turn the idle up a tad to make sure its not getting voltage drop. is my thinking correct? is there anything else i should try? thanks