My fuses on my pioneer head unit keeps blowing everytime I try to connect the harness to it. It first blew out when I was connecting my amp. Could someone please tell me why it keeps blowing out.Help me please!!!!!!!!!!!!!!!!!!!
I did that and everything is connected correctly to my knowledge. I didn't see anything wrong with the wiring but I rewired everything just to make sure and my fuse still blows. What else could it be??????????
well use only the yellow and the red wires to a 12v+ source and the black to a ground or to the negative of the battery... ignore illumination and all the rest if theres anything else... isolate em so it doesn't touch any ground...
if it still blows i think you might have a short inside your head unit or somewhere...
make sure you're not getting a short on the speaker wires too or if the RCA isnt touching a metal part of the car, ive seen similiar problems caused by this too
if it still blows you will have to take a look at the hu, thats very unusual for a head unit
edit: may be also good if you could wire another head unit to your car and see if this one's fuse blow