How to reattatch grill cover to door panel (Sketch-up file)

[THXdts 10+ year member]

http://www.sendspace.com/file/duv2zv

I made that to try to explain it a little better. What happened was that I broke it off, and can't figure out a way to reattatch it back to the door panel. The cover is just a tiny bit larger then the hole it covers. I tried super glue, kinda worked but not to well. Was wondering if anyone could help me out? Thanks.

Click to read more...

 

[mapolley07 10+ year member]

do you have photos of the door panel?? that would help more than the sketch up file

 

[dumple 5,000+ posts]

2 part epoxy!

 

[Worlddre 5,000+ posts]

http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=340-602

 

[jdawg 5,000+ posts]

you can get it at any hardware or automotive store

 

[THXdts 10+ year member]

I was trying to do something besides glue. It gets messy and u can see it on the panel and shit.

 

[Worlddre 5,000+ posts]

show us a picture

 

[dman4486 5,000+ posts]

duct tape

 

[jdawg 5,000+ posts]

if you use the epoxy i posted its clear, mix it on cardboard and put it on with a tooth pick, you wont see it

 

[THXdts 10+ year member]

http://img413.imageshack.us/img413/8407/0325082139vb0.jpg

 

[Worlddre 5,000+ posts]

clean the shit off of it and use any of the epoxies posted in a manner that makes them invisible

and next time dont break shit

 

[THXdts 10+ year member]

Yeah I just got done sanding the stuff off.

 

[dumple 5,000+ posts]

i found when i had to do something similar in my car that roughing up the edges that needed to be put together then putting the epoxy on holds really well

 

[mdillon 10+ year member]

try to glue it from the inside of the door panel so you wont get the drippy drips

 

[THXdts 10+ year member]

I don't think that epoxy will work. When I sit it on a flat table, it has some gaps. So it won't stick to the whole door panel..