how the **** do i fix this

[JoeK 10+ year member]

https://sphotos-b.xx.fbcdn.net/hphotos-ash3/c0.0.403.403/p403x403/544171_520868807964885_1258112562_n.jpg

The bass nudges the cable just enough to cause it to fvck off and be a duckhead.. this is the best i can get it... any better ideas? Possibly visually illustrated too

Click to read more...

 

[VWBobby 10+ year member]

Get a standard network cable and see if it fits tighter than what you have. That is pretty ghetto! Pinhead bass knob //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[JoeK 10+ year member]

How will i get my flash into the other end of the RJ45?? -.-

 

[k_schutte 10+ year member]

I don't even know what the faq I am looking at...

 

[JoeK 10+ year member]

I don't even know what the faq I am looking at...

jammed toof picks around the usb lug to stop it from jiggling as best as i could

 

[k_schutte 10+ year member]

Oooohhh... get a lil more ghetto and just hot glue that *****. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[VWBobby 10+ year member]

ahh I thought it was a bass knob when I first looked at it. Yep, if its USB about the only thing you can do is hot glue or epoxy it. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[nismos14 5,000+ posts]

Turn the bass down.

 

[JoeK 10+ year member]

Turn the bass down.

dont get silly on me....

im at the point where im about to glue it... or start looking for a similar hu with a rear usb

 

[nismos14 5,000+ posts]

You should do that anyway, but you probably should squeeze the usb down a little bit at the center points to create a tighter grip. If you use that same cable in the back if it falls out back there, guess what? Time to take out the HU and reconnect.

 

[k3n12ock 10+ year member]

Buy a USB extender and plug it into that and then electrical tape them together. That way, you can just plug your usb drives into the extender. Problem solved.

 

[nismos14 5,000+ posts]

It looks like that is an extender.

 

[Kingstroker 10+ year member]

that what you get when a porcupine mates with a HU

 

[JoeK 10+ year member]

Buy a USB extender and plug it into that and then electrical tape them together. That way, you can just plug your usb drives into the extender. Problem solved.

That *IS* what im doing and it still doesnt work

 

[JoeK 10+ year member]

You should do that anyway, but you probably should squeeze the usb down a little bit at the center points to create a tighter grip. If you use that same cable in the back if it falls out back there, guess what? Time to take out the HU and reconnect.

It's not that it falls out, its that the head unit flexes so badly that the cable gets knocked out... if it had a rear usb cable it wouldnt be a problem.. the faceplate jumping and the cable having to be in at a 45' is what kills it