na_rsx
10+ year member
Incriminator Audio FTW
Well i am looking at a custom ported box. I want the sub to face up, and the port to face the rear of the hatch. This is for a 2005 Acura RSX-S, and the sub is a Elemental Designs 13Ov.3 sub. This is a design i created in mspaint, just to give you an idea. I was thinking 1.8 cubic feet, tuned to 32 hz. I definitely want a flared port. I want it to be wide enough to fill the hatch from side to side, and half of the width of that hatch, not sure if that makes sense. Because i want to mount 2 amps and distro blocks to the back of the box. Basically add another piece of board to the back of the box with spacers, so i can run the wires through the back.
and this is how i want the amp rack to look, but i want it the same size as the box, so it wont be all cluttered.

and this is how i want the amp rack to look, but i want it the same size as the box, so it wont be all cluttered.
