hifonics bxi1606 amp for pioneer premier subs

[riddla 10+ year member]

Do you think this amp will run 2 of these subs effeciently or would i be beter of running 1 with the amp. Ive just bought this amp & want to know if this will do the job

the amp is rated at 1600w@1ohm or 1100w@2ohm

heres the link to the subs.

http://cgi.ebay.com/ebaymotors/2-PIONEER-PREMIER-6000-WATT-SPL-12-CAR-SUBWOOFERS-SUBS_W0QQcmdZViewItemQQcategoryZ38647QQihZ017QQitemZ270177923153

Click to read more...

 

[jco1385 5,000+ posts]

those are some nice subs.

 

[KickerSoItBump 10+ year member]

Well if the subs are rated for 1000rms a piece, its kind of in the middle.

Supposed the hifonics puts out 1600w @ 1ohm, you'd be feeding both subs 800w a piece, which will probalby get them moving well enough. More realistically you'd prolly get 1400w or so out of that amp so 700w a piece.

Even then it would sound nice, so its just a preference.

My noobx advice.

 

[riddla 10+ year member]

THANX 4 REPLIES. Ok, another question, Ive currently got a Fusion Powerplant few15 sub at the moment rated at 500wrms, 1200 peak. Do you think im gonner blow the hell out of it if I connect this amp to it. The sub is in a slot ported box tuned to about 32hz ?

 

[jco1385 5,000+ posts]

uhm, turn el gaino down and you should be fine

 

[KickerSoItBump 10+ year member]

yeah, just be careful and listen for the sub being pushed to hard.

I blew a 15 just recently cuz i was pushing it to hard, but it was a cheapie so i dont really carez.

 

[riddla 10+ year member]

do u think these 2 12s will sound better than my fusion 15 ?

 

[jco1385 5,000+ posts]

lots of variables, but i'd say it should. if not, send me the premiers and put the 15 back in.... //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[riddla 10+ year member]

lol mate. my dimensions are 32 long, 16 high and any depth but prefer 16-18 deep. would the premiers work in this box with a slot port, a design would be good if possible

 

[jco1385 5,000+ posts]

thats not my area of expertise man. no clue...

 

[DownSouth954 10+ year member]

Right now I have a pair of 12" Premier TS-W3004SPL's in some ported flea market prefab enclosure and my Brutus 1606D powers them just fine at 1 ohm. Granted my electrical still needs a ton of work and the box totally sucks...

 

[riddla 10+ year member]

cool, considering, how do they sound & is the amp a brute ie mean