Help with what i need

[Avalon03 10+ year member]

First off im new here.

Ok i have two jl 10Wv1s and one jl 12Wv1 in a sealed box. (Got them from a friend for $100)

All three subs are connected and i was wondering what amp should i buy.

Im looking at a kicker 1000w or Kicker 750w or TMA 1000w all mono channel.

Need some input from people that now there stuff.

Click to read more...

 

[tRiGgEr 5,000+ posts]

I'll go easy on you.

General rule of thumb, don't mix different models and speaker sizes. They will perform differently and cause a really bad response in your overall sound.

Not to mention it looks janky.

Maybe fix that before purchasing a amp.

Aside from that, make sure your final ohm load will match the output of the amp you wish to purchase. If you want to get the most out of it.

 

[Avalon03 10+ year member]

Also any words of advice are welcome. Any suggestion for what kind of amp i should get, if i should get a new box (which i do need). Thanks

 

[Avalon03 10+ year member]

I'll go easy on you.
General rule of thumb, don't mix different models and speaker sizes. They will perform differently and cause a really bad response in your overall sound.

Not to mention it looks janky.

Maybe fix that before purchasing a amp.

Aside from that, make sure your final ohm load will match the output of the amp you wish to purchase. If you want to get the most out of it.

Thanks. These are my first subs ever, bought them like 6 months ago. I def want to fix them or just get new subs but im gonna work with what i got for now. I know they are very janky! What kind of amp should i get though

 

[Kold_Killa 10+ year member]

My advice.

1. Sell the 12

2. Build new box for 10s

3. Buy an amp that puts out ~500 watts at 2 ohms

4. Install

Edit: what's your budget for an amp, that will help us make suggestions.

 

[Avalon03 10+ year member]

The twevle is cracked....ok right now im thinking 500-600$ for amp, stereo and wires and box. Maybe new subs too if i sell the 10s

 

[Avalon03 10+ year member]

bump