Help with my ynew system!

fantasymon

Junior Member
So my Explorer was broken into last week and got my head unit, 12 kicker sub, and 1000Watt Kicker amp stolen.

I decided I wanted to put a nice system in there and need some help on how to install (with alarm system this time //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif ).

Heres the main components that I just bought from crutchfield and cardomain.com:

1. Infinity 6 channel amp (5760A) : RMS: @ 4 Ohms: (56W x 4) + (107W x 2)

2. Infinity mono sub amp (611a) RMS: 456W x 1 @ 4 ohms

3. 3 way Pioneer 6X8 speakers (TS-A6881R) RMS: 50W 4ohms (For Front seat)

4. Polk 6X8 speakers RMS: 50W 4 ohms (For back seat)

5. Infinity Kappa (32.7cf) 3.5 inch speakers RMS: 35W 2 ohms

6. Infinity kappa 12 inch subwoofer (124.7w) RMS: 350W 2 or 8 ohms

7. Polk 6X9 3-Way Speakers (db690) RMS: 100W 4 ohms (For cargo area)

8. 4 gauge Streetwire amp kits for both amps

9. 14 gauge Streetwires speaker wire

10. JVC KDHDR1 CD player with 3 preamp outputs

I KNOW I could have just gone with the 6 channel amp but I want a seperate amp for my subwoofer. My main help needed is regarding the 6-channel amp.

What I would like to do is have the pioneers in the front, polk 6X8 in the back seat ,and then the polk 6X9 in the cargo area by the sub. The amp has three RCA inputs labeled front, back, and sub. I don't want to hook my sub up to this. I want my 6X9's to use the amplifiers sub power. The speakers RMS is rated at 100 and the amplifier sub part is rated at 107W. Can I do this? Would I have to split my REAR rca cable so that I can plug it into the amplifiers rear and sub rca ports?

How can I put the Kappa 3.5 inch speakers into this amplifer? Can I just tie them with the back seat or fron seat speakers or is that a bad idea? What if I just hooked them up to the wire that is currently going to my front speakers since my front speakers will be going through my amp? They are $100 speakers and I REALLY want to use them so please don't say they arent necessary. I got a good deal on them and thats why I bought them.

So basically I need to know how I can put all 8 speakers efficiently into the 6 channel amp.

I know most the basics to car stereo but that is about it! Please don't tell me how I bought too much stuff or the wrong stuff because its not going to help me out!

Also, do you recommend a capacitor?

Thank you!!!!

Grant

 
You could have used all that money spent on all those speakers and that amp to buy one really good set and a 2 channel amp to power them.

 
I haven't decided where I am going to put the kappas. Not too limited, I just want them hooked up. Probably won't put them in the dash because I don't want them visible to theives.

And I didnt want a 2 channel amp. I mainly listen to rock and as amature as this may sound, I wanted a variety of speakers.

I got everything listed plus boxes for the sub and 6X9s brand new for under $900 so I think I did good. Yes I know there were probably better ways to go but this is what I chose.

Can somebody please help me with my questions?

Thank you!!!!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

fantasymon

Junior Member
Thread starter
fantasymon
Joined
Location
dallas
Start date
Participants
Who Replied
Replies
3
Views
473
Last reply date
Last reply from
fantasymon
561786595_18427607485102160_7010259965928918509_n.jpg

just call me KeV

    Oct 9, 2025
  • 0
  • 0
561583216_18427455586102160_8141545757991593433_n.jpg

just call me KeV

    Oct 9, 2025
  • 0
  • 0

New threads

Top