Help me out please AMP questions

ArcFault
10+ year member

Senior VIP Member
they are single 4 ohm mtx 300 rms subs they will take 500 easily tho. a gpv 2000.1 would be quite a bit stronger at 2 ohms than the 1400.2. you can also get much better subs cheaper even to canada //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif i ship to canada alot it is about 30$ extra is all.

 
I already have the subs. I was told to run them at 4 ohms.. I was alaos told the only way to run them at 4 ohms was to put each one in it's own channel. Has something to do with the style of music I listen to.

Why would this amp only deliver 200 each?

 
here arethe specs.

Mfr. Part Number: TC512

Band Pass Volume Not Applicable

Basket Material Stamped Steel

Binding Posts Chrome Push Terminals

Cone Material Expanded Poly

Frequency Response 30Hz - 150Hz

Impedance 4 Ohms

Magnet Weight 1.98 kg

Mounting Depth 6 11/16"

Ported Box Volume 2 ft/3

Power Handling Max 900 Watts

Power Handling Nominal 300 Watts

Product Warranty 1 Year Parts & Labour

Recommended For Band Pass No

Recommended For Ported Yes

Recommended For Sealed Yes

Sealed Box Volume 1.25 ft/3

Sensitivity Not Applicable

Surround Material Rubber

Voice Coil Size 1.75"

Woofer Size 10"

 
if these are single 4's,how come in your other thread you said you need 4 ohms?are you not bridging the amp for more power or are you running 2, 4 ohm channels?

if you bridge,you need 2 ohms,right?

 
if these are single 4's,how come in your other thread you said you need 4 ohms?are you not bridging the amp for more power or are you running 2, 4 ohm channels?if you bridge,you need 2 ohms,right?

I don't know... I was tod to run two 4ohm channels... I have no idea how to select the ohms I want to use. And yes, I want to run them at 4 ohms. And I don't understand that bridging stuff.

I understand you use positive on one and negative on other. From what I understant I wont get 4ohms that way.

I think.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

ArcFault

10+ year member
Senior VIP Member
Thread starter
ArcFault
Joined
Location
Canada
Start date
Participants
Who Replied
Replies
15
Views
889
Last reply date
Last reply from
ArcFault
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top