hdc312 on a gp3000d-pro

[LuvnThatBass 10+ year member]

haha exactly.

 

[LuvnThatBass 10+ year member]

ok well, i unhooked the speaker. and it read 2.0 ohms to start, then a minute later fell to 1.9 ohms. what does this tell me?? about 1500wrms are coming from the amp? (thats what the amp is rated at into 2ohms.

 

[LuvnThatBass 10+ year member]

ok so i am about to order a clamp off the internet. should i get a cheap one, or is it necessary to get a true rms clamp?? and how would i go about measuring my approximate wattage?? i did a little searching on this forum but some of it was just confusing. i will have one of the above described clamps and a DMM, nothing else, to measure with. let me know!!

 

[terra 5,000+ posts]

you dont need to get a clamp. just measure each side. if each side says 2 ohm its a d2 sub. means ur either at 4 or 1.

 

[LuvnThatBass 10+ year member]

you dont need to get a clamp. just measure each side. if each side says 2 ohm its a d2 sub. means ur either at 4 or 1.

when i have the sub wired (supposedly parallel), i measure the ending wires (the final two that would go into the amplifier) and my dmm reads at 1.9-2.0 ohms (jumps very minimally.

 

[LuvnThatBass 10+ year member]

and i wanna measure my reactive ohmage

 

[Idealrealist 10+ year member]

You need to get together with someone off the forum(that knows their shit) and get this problem solved.

 

[97blazer 10+ year member]

I'm confused now after reading everything. You said you measured the speaker then said measured the ending wires and get 2 0hm which means 2 ohm nothing more nothing less. which would mean you have a single 2 ohm speaker. Right? Did you pull the speaker out and check it or just check the wires?

 

[97blazer 10+ year member]

I re-read the threads and see where you said both pos and both neg wired together. Is it possible the two coils fused into one, like maybe one burned and landed on the other.

 

[IgnoreMe 5,000+ posts]

what in the flying ****?

you measure 1 pair of leads and get 2 ohms right?

you measure the other leads and get 2 ohms right?

and when you wire in parallel you get 2 ohms also?

 

[97blazer 10+ year member]

LOL.....the weather man on tv has just said "notch" about fifty times.

.

( )

 

[97blazer 10+ year member]

What's up ignoreme. Cool pic.

 

[97blazer 10+ year member]

Yeah I just read this guys whole story and it sounds like somethings goofy with his sub.

 

[IgnoreMe 5,000+ posts]

What's up ignoreme. Cool pic.

i stole it from some guy on another forum //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[97blazer 10+ year member]

2girls+1cup=bad