hdc3 18s are in!

[dbeez 5,000+ posts]

very nice my box is going to be a tad shorter...

 

[kentb 10+ year member]

as for the output... ouch. if i had to guess, i'd say even with the voltage drop and without having completely tweaked the settings, i'm doing 50's on music.
in about an hour of playing yesterday, i knocked the filaments loose in 2 of my domelights' bulbs. not really sure how i'm going to counter that.

much thanks to bj fisher for building the box, mobeious for his input, tommyk90 for the box design, and dB-r for the timely repair on the memphis.

i doubt 150 on music, should be at at upper 140's though.

i sent you a pm

 

[JEXTEL 10+ year member]

i doubt 150 on music, should be at at upper 140's though.i sent you a pm

x2

 

[bass-aholic 10+ year member]

What kind of electrical you running all that power on? Just wondering cuz i didnt see any batts in the back and am wondering if theres any other places you can cram batteries.

 

[Lil Poot 5,000+ posts]

i doubt 150 on music, should be at at upper 140's though.i sent you a pm

you're doing 50s on music, and from what i can see in your videos, i'm moving more air than you. my camera doesnt pick up all of the flex, and for some reason when youtube converts it to their format, it loses even more of it.

i've sat in a car doing 149s on music, and i'm definitely louder than he was. i know vehicle environment and a lot of other factors come into play... but i'm pretty confident in that statement.

 

[Lil Poot 5,000+ posts]

What kind of electrical you running all that power on? Just wondering cuz i didnt see any batts in the back and am wondering if theres any other places you can cram batteries.

electrical is in my sig. the d3100 is under the larger of the rear seats. i'm picking up another d3100... i think i'm going to have to remove the smaller of the rear seats and do a rack to fit it, but i'll try to keep the whole back seat if i can.

 

[jnralp00 10+ year member]

isnt any worse than playing them hard free air though. the suspension isnt bottoming or anything like that, so i dont see what the problem is.

I didn't say there was a problem I was just answering the question and no it's not as bad as free-air.

 

[46panel 10+ year member]

i doubt 150 on music, should be at at upper 140's though.i sent you a pm

Yea why would you say hes not doing 150's? I'd be pretty confident to say he is or very close.

 

[Lil Poot 5,000+ posts]

also keep in mind the amp was seeing 12-12.5 volts through all but the very start of that video //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

i'll get some new videos later this week when i get the mla module in, should be maintaining at least 13s then. i'm hoping to stay mid to high 13s at idle with the mla and the extra d3100 in. i dont really want to abuse my amp and charging system like that for another video for at least a few days, let the batteries rest up //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

i'll host on photobucket from now on, i'm rehosting this one at the moment so you can see the difference youtube's format makes. flex means jackshit i know... especially since i have a hell of a lot of deadener everywhere in the truck, triple layers on the roof, but it also makes the shirt look like it isnt moving as much as it is.

 

[Lil Poot 5,000+ posts]

a little better, but it still seems to have degraded it a bit from how it looks straight off my camera. anyone know a host that will keep the quality intact?

http://s204.photobucket.com/albums/bb197/1meangta/?action=view&current=SNC10987.flv

 

[Linkz 10+ year member]

a little better, but it still seems to have degraded it a bit from how it looks straight off my camera. anyone know a host that will keep the quality intact?
http://s204.photobucket.com/albums/bb197/1meangta/?action=view&current=SNC10987.flv

you would have to put the file up on a file host like rapidshare or uploading.com

 

[tommyk90 5,000+ posts]

seriously. i havent made any boxes in a few years but when i used to, a sheet of 3/4 mdf did not feel any thing like 80lbs, 50max

A 4x8 sheet of 3/4" mdf weighs around 80-90 pounds.

A sheet of quality birch weighs around 50.

Glad you are happy with the design. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[tyler_fitz 10+ year member]

looks like a killer setup. you got any old equipment you wanna sell me? lol

 

[Lil Poot 5,000+ posts]

looks like a killer setup. you got any old equipment you wanna sell me? lol

i've got a 9518g motor/basket, and an optima yellow top g31 i'd sell ya cheap. still have that alumapro alc 6.2 component set too. i also have a couple of bj fisher built, pete kulicki designed ported boxed taking up space in my garage... one for an 05 xxx 18 designed for flat response, another for the 9518 designed to get piss loud, both 41 inches wide. what happened to the q 15 i sold you?

let me know if you're gonna be in wichita and want to have a listen to it sometime.

 

[Lil Poot 5,000+ posts]

well here's the direct link if anyone cares that much //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

http://uploading.com/files/YH9E67UT/SNC10987.AVI.html