so i bought crystal sscs 6 and installed it about 2 months ago. everything was fine until one of my midbass stop producing sound. so i tore apart the door panel and notice the midbass wire was burnt. so i replaced it and try to test it. but there was still no sound so i thought something was wrong with the midbass itself. so i use the other side and replaced the midbass. i was surprise and glad that it work so it must be something else. i didnt check any other wiring since my tweeter work so i didnt think it was the crossover. however when i gave up on everything, i open up the crossover and notice one of the coil was hanging by a thread. a lil piece of glue was barely making that coil stick to the board. now i dont know hwo this happens nor how to fix it. crystals movilesound just went out of business so i think im basically screwed unless there is a way to fix this. any advice to what i should do would be much appreciated.
