Got my Hertz components in...active help

[bamaboy 5,000+ posts]

:copy from build thread:

Hertz ML280 amd ML1600 which are the same pieces they use in the MLK2 setup, minus the Xover, was going with the mlk165 but the tweets on these sold me, pure secsy in person, not a big fan of the other ones

uses NEO mag, because im concerned about weight and gas mileage //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

for a set of 700$ tweeters, they are nice enough to give you a sticker:crap:

the whole tweeter housing is milled out of aluminum

Click to read more...

 

[bamaboy 5,000+ posts]

can change the back chamber on the tweets to tweak the roll off and such, kinda deep to be mounting in some locations

now im gonna be using my 3sixty.2 as the xover, havnt run active yet, so its gonna be a learning experience for us, prolly gonna start about 2khz and play around with them a little and then go from there

tweeters are going in A pillar, mids in stock location, gonna be deadening them good, prolly hp them at 80-90 at -24db, working on redoing everything in the truck so wont be too long

hope it turns out good:crap:

 

[XaznKewLguyX 10+ year member]

nevermind

 

[Side Show 10+ year member]

dam, i want some

 

[Cxrazy 10+ year member]

I've got some really cool stock speakers that we could trade.

I'd probably come out a bit at a loss, but you seem like a nice guy. Go ahead and send me all your stuff mmk?

Thanks.. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

But back on track, I really want to see how this turns out... //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Megalomaniac 5,000+ posts]

i was quoted $380 for those ml280 tweeters here local....how unfortunate for you.

You got some sexy stuffs!

 

[bamaboy 5,000+ posts]

really?

trust me, i didnt pay near 380$ for them either, but i believe list is like 650$ or so

thanks guys //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[headless 10+ year member]

nice set; hope they impress //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I like the shallow mounting depth; do you know the xmax on those woofers?

 

[Megalomaniac 5,000+ posts]

nice set; hope they impress //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I like the shallow mounting depth; do you know the xmax on those woofers?

you like shallow eh, check out the Space, a friend of mine has it and man its wild.

 

[Megalomaniac 5,000+ posts]

really?
trust me, i didnt pay near 380$ for them either, but i believe list is like 650$ or so

thanks guys //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

lucky bastard! I bet you saved even more just buying the raw drives and no xovers

 

[bamaboy 5,000+ posts]

nice set; hope they impress //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I like the shallow mounting depth; do you know the xmax on those woofers?

shallow?//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif, alot deeper than my pro 60s

pretty deep speakers in person, i think its around 3" deep ,not as bad as the mlk165 woofers which use ferrite magnet

lucky bastard! I bet you saved even more just buying the raw drives and no xovers

yea, mlk2 set retails like $2k, but they come in a big aluminum briefcase, and no need for crossovers, so i chose to just buy the drivers seperate, saved a good bit

 

[ngsm13 5,000+ posts]

What's the FR on those tweeters? Mids?

If you have an FR graph, it would help to better see an ideal place to start. Though best sound will come from tweaking //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

nG

 

[Megalomaniac 5,000+ posts]

they play crazy low id prolly run them at the 1800-2.5 range though if it were me

 

[ngsm13 5,000+ posts]

Yeah, I'd defnitely take them to ~1.8kHz then

nG

 

[aeon 10+ year member]

wow those are nice. so how much did the set cost you?