Got a ton of interference!

[7angofragger]

Hey all. I drive a 1995 Plymouth Neon with a wings west body kit, wing, rims, lowered. I replaced all my stock speakers, my cd player, and added 2 12", an amp, and an Alphasonik eq.. I wired them all up bypassing the stock wire harnesses. At first, they worked perfect. Sounded great. But i had a flat tire, i had to unhook my amp/subs, take them out of the trunk to get my spare out. I hook them back up, and now i have a TON of interference. First off, if i turn down all the bass, when i start the car up, i heat a ton of engine noise. When iam running about 2 to 4k RPM's, it isn't annoying, but when i stop at a stop sign/red light, all i hear is loud bussing. Now when i turn my bass up to normal, i get engine noise through my subs. how do i fix this?

Click to read more...

 

[helotaxi 5,000+ posts]

You knocked a connection loose when you took everything out. Go back and check all your connections, especially grounds and RCAs.

 

[PhatTonyDeMarco 5,000+ posts]

It's the body kit man, remove it right away.

Did you check your wing fluid?

 

[mlstrass 5,000+ posts]

Hey all. I drive a 1995 Plymouth Neon with a wings west body kit, wing, rims, lowered....how do i fix this?

Find an open stretch of road, try to hit 110mph or so, look for a brick wall and play tag with it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Assuming you won't go through with it and still own that POS, then I'd check your ground wire as you probably knocked it loose when removing stuff.

 

[DoobieBrother 10+ year member]

It's the body kit man, remove it right away.
Did you check your wing fluid?

That's better than the one I came up with when I first started reading this, so, I'll just say, "See above." //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[DoobieBrother 10+ year member]

Find an open stretch of road, try to hit 110mph or so, look for a brick wall and play tag with it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Assuming you won't go through with it and still own that POS, then I'd check your ground wire as you probably knocked it loose when removing stuff.

You guys are brutal, but I LMAO off that one too!

 

[ultimate157 5,000+ posts]

What CD player do you have? Also check the grounds for your amps. Make sure they are solid and on bare metal.

 

[blackbonnie 5,000+ posts]

you hit something or pulled a wire loose when you were taking it out. go over your wires and secure all your connections, and this is caraudio.com, not letstalkaboutmyriceburnerbeforeitgettothepoint.com, lets just here about the equipment and wiring in this section.