good turbo?

[frankjuda 10+ year member]

i forund this site and im newer to turbos would this kit be good?

http://www.turbo-kits.com/protege_turbo_kits.html

Click to read more...

 

[19psi 10+ year member]

yeah that would work fine. it won't make huge power being a T25, but that' about all the airflow/pressure a stock engine can take.

 

[frankjuda 10+ year member]

its not going to be stock for long

im gettin a new cylinder head, new pistions, new cams, basically rebuilding the whole engine

 

[Jwren 10+ year member]

go bigger

 

[JLa Obsessed 10+ year member]

go bigger

go big or go home is what i always say //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

things are going to get interesting for me this summer, thinking about doing a H22 engine swap on my V6 accord if i can get the money. I'll definitely do a build log on that //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[19psi 10+ year member]

if you're going to do a forged rotating assembly, then make your own turbo kit with something like a t04 based turbo.

 

[dman4486 5,000+ posts]

go big or go home is what i always say //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gifthings are going to get interesting for me this summer, thinking about doing a H22 engine swap on my V6 accord if i can get the money. I'll definitely do a build log on that //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

my cousin has an h22 in his 92 dx it moves!!

o...and naturally aspirated BIG power or go home

 

[onyxaltezza 10+ year member]

GT28RS!

Thats what Im saving up for..in my MR2 turbo. Solid 300RWHP and full spool under 3000RPMs. What more could you ask for =D

-Aaron

 

[94civik 10+ year member]

Build your own kit- you'll be happier.

 

[garrettpf 10+ year member]

It looks to be a fine turbo for stock engines. With the size of the turbo you will get quick spool but puke out at higher RPM. Can handle close to 15PSI with spikes near 19. If you are going to mod the internals of the engine and get a new head then like the gusy say, go bigger. No since spendin' all that money and putting on a small turbo (unless you use it in a Sequential Twin Turbo setup //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif )