Good liquid adhesive for car audio?

[yo0123yo 10+ year member]

whats a strong liquid adhesive used for car audio? im trying to mount my tweeter in my stock tweeters place and need a strong adhesive that will hold it in place and harden super fast. thanks

Click to read more...

 

[kingisback08 10+ year member]

ive used some 3m double sided sticky pads before, they dont seem like they would hold to much at first but after a while i went to peel em off and man were they on there. try those out

 

[Moe Lester 10+ year member]

CA glue + accelerator go to your local RC hobby shop and they will have it.

 

[audioarsonal 10+ year member]

Bobs IC2000 black rubberized CA glue + accelator=stuck for good

 

[jdawg 5,000+ posts]

you can get it at advanced, autozone, walmart, etc

 

[audioarsonal 10+ year member]

you can get it at advanced, autozone, walmart, etc

He needs it to harden fast.If he were to get this I would suggest the 30sec. set time.It will set hard in about 3hrs and should be soild.

 

[oldschoolboomer 10+ year member]

for tweeters i recommend hot glue

 

[audioarsonal 10+ year member]

But if there in the dash close to the window it can be tricky getting a glue gun speaker and 2 hands in there.Its better to just get the IC2000 and accelator and be done.Plus the many other uses it has

 

[audiolife 5,000+ posts]

But if there in the dash close to the window it can be tricky getting a glue gun speaker and 2 hands in there.Its better to just get the IC2000 and accelator and be done.Plus the many other uses it has

like finding finger prints!

 

[audiolife 5,000+ posts]

Also the more kicker you use in the epoxy the more brittle it becomes so IF you are using it on a servicable area I would use a bit more as it will "break" away much easier but still hold better than hot glue.