Getting the FG mold out?

[Blue Fury 10+ year member]

I used masking tape on a big area for fiberglass. It's all dry now and I need to get it out but it's being a real pain in the ***. Any ideas on how I can get it out by unsticking the making tape?

Click to read more...

 

[Blue Fury 10+ year member]

up

 

[edzy 10+ year member]

heat gun? pull/pry harder?

 

[azbass 5,000+ posts]

pull

 

[Fiercetimbo17 10+ year member]

Did you not use foil or any type of releasing agent?

How many layers of tape did you use?

and pull like said above

 

[MTX520 10+ year member]

Pull Con Vuevos My Friend!!!!!

 

[Blue Fury 10+ year member]

I was in the trunk pulling hearing tiny cracks for like 15 mins before I posted this. Guess I'll keep doing that.

 

[edzy 10+ year member]

ya, thats the spirit.

 

[audioarsonal 10+ year member]

You must not have used foil

 

[davidfre21 5,000+ posts]

lighter fluid //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[fbi90909 5,000+ posts]

get a wooden stick, like a paint mixing stick and slip it around the edges. it'll help some.

 

[jmanpc 5,000+ posts]

Should have used crisco.

 

[Blue Fury 10+ year member]

I got it. It took an actual full length crowbar but I got it. Minor damage to one area, negligible damage to another. Good thing this particular part will never be seen and is not used for major structural support. Next time I'll use foil for large ares.

Thanks gents!

Back to work for me.