Hey im gonna sell my 450/4 version 2 jl audio amp i just got. Only had for about 1 week, was only ever used for about a week as a demo at retail store. Does have warranty and could possibly get the two year on it (cant guarantee name transfer tho). 10 out of 10. will run components and a subwoofer. Would consider another amp + cash, or a double din indash dvd. Otherwise lookn for $530 shipped and insured.
Channels 1 and 2:
o Rated Power (stereo mode): 150W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
o Rated Power (bridged mode): 300W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V)
* Channels 3 and 4:
o Rated Power (stereo mode): 75W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
o Rated Power (bridged mode): 150W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V)
* Peak Power Output 900 watts approx.
* Differential-Balanced Input Topology: (2 pairs of inputs)
* Channels 1 and 2 Crossover:
o Fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave)
* Channels 3 and 4 Crossover:
o Fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave)
* THD at Rated Power:
* S/N Ratio*: >108.5 dB below rated power
* Frequency Response: 5 Hz-30 KHz (+0, -1dB)
* Damping Factor: >200 @ 4 ohm per ch./50 Hz
* Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS
* Preamp Output: 2-channel (Pass-through with selectable input sourcing)
* Bass EQ: +6 dB (variable boost up to +15 dB with Remote Bass Option)
* Infrasonic Filter (Channels 1&2 only): defeatable 24dB/octave at 30 Hz
* Speaker output connections: accept up to 8ga. wire
* +12V and Ground connections: accept up to 4ga. Wire
* Fuse Rating: 60A
* Dimensions: 19.4"L x 9.25"W x 2.36"H
Channels 1 and 2:
o Rated Power (stereo mode): 150W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
o Rated Power (bridged mode): 300W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V)
* Channels 3 and 4:
o Rated Power (stereo mode): 75W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
o Rated Power (bridged mode): 150W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V)
* Peak Power Output 900 watts approx.
* Differential-Balanced Input Topology: (2 pairs of inputs)
* Channels 1 and 2 Crossover:
o Fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave)
* Channels 3 and 4 Crossover:
o Fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave)
* THD at Rated Power:
* S/N Ratio*: >108.5 dB below rated power
* Frequency Response: 5 Hz-30 KHz (+0, -1dB)
* Damping Factor: >200 @ 4 ohm per ch./50 Hz
* Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS
* Preamp Output: 2-channel (Pass-through with selectable input sourcing)
* Bass EQ: +6 dB (variable boost up to +15 dB with Remote Bass Option)
* Infrasonic Filter (Channels 1&2 only): defeatable 24dB/octave at 30 Hz
* Speaker output connections: accept up to 8ga. wire
* +12V and Ground connections: accept up to 4ga. Wire
* Fuse Rating: 60A
* Dimensions: 19.4"L x 9.25"W x 2.36"H
