Sold FS: Tons 'O 10s" & Enclosures: RD 10s", Ported & Deathbox

528hz
10+ year member

Everything'sMiscellaneous
Rating: 100%
6 0 0
Back with some deals gentelmen!

I have a total of 7 subs, and 2 enclosures I'd like to get rid of at the moment. All prices are pretty firm I "may" entertain trades for 3 12s". All items are cosmetically/mechnaically excellent.

First up I have two RD Sonance 10s", DUAL 2 OHM subs. They are brand new, never seen power and are the V3 versions. They are also flatwinds and can take up to 1200 watts RMS. Specs can be found here: Top quality audio equipment: Revolution Design Audio

 

$150 SHIPPED. 1 SOLD, 1 left

DSCN1630.jpg


Next I have 2 RD Sonance 10", DUAL 4 OHM subs. They are all used, but in excellent mechanical/cosmetic condition. The only thing I did to them was paint some epoxy around the dust caps to insure that they stayed, and they aren't going anywhere. I didn't have my small drill with me at the time of taking the pics to take them out of the bandpass. Specs can be found here: Top quality audio equipment: Revolution Design Audio

 

ALL Dual 4 ohm 10" Sonances have been SOLD!!!

Thirdly, I have an RD Classic 10" Dual 4 ohm and a Deware Deathbox. That's right...a Deathbox. if you're not familiar with this enclosure you can go here and find out about it: DECWARE's Death Box II - High Output Subwoofer

 

The Classic 10" is brand new and never seen power. Specs can be found here: Top quality audio equipment: Revolution Design Audio

 

I've run a Sonance in the Deathbox to test it out and it's really amazing! Gets about as loud as 2 ported 10s" off very little power. I was running my Stetsom 4k2d at 8 ohms and it pounded. It has a fully adjustable port to set the desired tuning frequency. Dimensions of the box are: 13 7/8 x 19 1/2 x 13 7/8.

 

RD Classic 10" and Deathbox have been SOLD!

Finally...I've had this ported box for two 10s" for quite sometime. Need to get it out of here. It was built by SPY and it made out of Birch ply. The box is COMPLETELY KERFED, and yes, I know the staining job looks horrible, but all you need to do is give it a slight sanding and paint it to your desired color. Or for a small fee, I would paint it for you.

 

It is really a great box. Tuned @ 34 hz, and 2.5 CF after displacement of most 10" subs. Dimensions are: 13 x 20 x 31

 

SOLD!

 
Last edited by a moderator:
you think the rd d2 can take 1500watts?

Personally...I really think so, especially because of the fact they're V3s. They have a longer former which makes them capable of more XMAX compared to the V2s; plus the flatwind coil. I'm not bullshitting when my Sonances barely even got warm after me throwing a 45 hz, 0 db test tone at 'em for about 3 minutes when I was metering full tilt.

I KNOW I was getting at least 1000 watts per sub on mine, and I ran those subs for a good 4 months.

These D2s are kinda stiff too. Granted they aren't broken in yet.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

528hz

10+ year member
Everything'sMiscellaneous
Thread starter
528hz
Joined
Location
In the Space between Space in NM
Start date
Participants
Who Replied
Replies
52
Views
2,983
Last reply date
Last reply from
528hz
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top