I hate to sell this but I need new wheel bearings and rotors on my 4x4, so this will have to go.
This amp is rate 9.5 on 1-10 scale for cosmetic appearance and a perfect 10 for functionality.
I am also including the custom plexi-glass rack/cover with this so you to can avoid cosmetic damage.
This is an awesome SQ amp with great flexibility and sufficient power to drive almost any load without audible distortion.
This could very well be the last amp you ever buy.
Here are the specs:
* 4 ohms: 125 watts RMS x 4 channels
* 2 ohms: 250 watts RMS x 4 channels
* 4 ohms bridged: 500 watts RMS x 2 channels
* Proprietary power supply topology
* Patented topology that reduces power supply stress by 50%
* Amplifier protection topology
* Ultra Low ESR Capacitance bank ensures rapid power delivery for dynamic peaks
* Continuously variable 12dB low-pass crossover (30Hz to 4kHz)
* Visual amplifier protection status
* Triple Darlington Output Circuitry
* Continuously variable high and low pass crossovers with 12 dB / Octave slope (30-4KHz)
* Vortex induction fan for thermal management
* Platinum RCA Line inputs and outputs
* Platinum 4 gauge power inputs
* Rail stabilization protection circuitry
* Tri-mode operation
* Input Protection for unbiased results
* Bass Alignment Produces tighter, more accurate bass reproduction
* Bi-Linear selectable 2 way crossovers for amplifiers and line outs
* 10Hz - 50 KHz Frequency response
* >115dB S/N ratio
* >500 Damping
* .15V - 12.0V Input sensitivity
* 0.02% THD
* Dimensions 15.8" L X 2.6" H X 11.2" W
$399 Shipped in the USA
[/img]
This amp is rate 9.5 on 1-10 scale for cosmetic appearance and a perfect 10 for functionality.
I am also including the custom plexi-glass rack/cover with this so you to can avoid cosmetic damage.
This is an awesome SQ amp with great flexibility and sufficient power to drive almost any load without audible distortion.
This could very well be the last amp you ever buy.
Here are the specs:
* 4 ohms: 125 watts RMS x 4 channels
* 2 ohms: 250 watts RMS x 4 channels
* 4 ohms bridged: 500 watts RMS x 2 channels
* Proprietary power supply topology
* Patented topology that reduces power supply stress by 50%
* Amplifier protection topology
* Ultra Low ESR Capacitance bank ensures rapid power delivery for dynamic peaks
* Continuously variable 12dB low-pass crossover (30Hz to 4kHz)
* Visual amplifier protection status
* Triple Darlington Output Circuitry
* Continuously variable high and low pass crossovers with 12 dB / Octave slope (30-4KHz)
* Vortex induction fan for thermal management
* Platinum RCA Line inputs and outputs
* Platinum 4 gauge power inputs
* Rail stabilization protection circuitry
* Tri-mode operation
* Input Protection for unbiased results
* Bass Alignment Produces tighter, more accurate bass reproduction
* Bi-Linear selectable 2 way crossovers for amplifiers and line outs
* 10Hz - 50 KHz Frequency response
* >115dB S/N ratio
* >500 Damping
* .15V - 12.0V Input sensitivity
* 0.02% THD
* Dimensions 15.8" L X 2.6" H X 11.2" W
$399 Shipped in the USA
