Sold FS: Sealed Enclosures for 12" subs 4 of them

[amedeuce 10+ year member]

Ok nothing special although very well made by me //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

All 3/4 inch MDF two have carpet one had carpet and has been pulled off, a couple have terminals and the others have holes for wire.

I'll put the weight with each, the weight is just the weight of the enclosure itself no packaging.

 

I'm sure shipping might be a big factor so I'll keep prices low. Let's go $25.00 each plus actual shipping. I say 25 dollars due to having to purchase a shipping box with packing materials.

I prefer local pick-up or just a little driving involved. Local Pick up or little driving 15 dollars each

I live in Lemoore California 93245 which is close (30 mins south) to Fresno CA.

Top enclosure 14x14x16 with quite a bit of bracing = 1.28 cubic feet net weight = 23lbs - SOLD

2nd from top enclosure 19x11.75x19 with bracing and recessed front = 1.58 cubic feet net weight = 34lbs

3rd from the top enclosure 15x13x14 recessed front, no bracing = 1.05 cubic feet net weight = 19lbs

bottom enclosure 14.25x14x17 = 1.4 cubic feet net weight = 24lbs.

With dimensions

Click to read more...

 

[amedeuce 10+ year member]

If these don't sell I'm gonna smash them with my sledge hammer //content.invisioncic.com/y282845/emoticons/satan.gif.9c6a335ed7aeeed3ee273e573f1fcaac.gif

Then you all will be sorry //content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif

 

[amedeuce 10+ year member]

I'll even pull the carpet off the others and sand them all down real nice

 

[amedeuce 10+ year member]

up

 

[amedeuce 10+ year member]

up

 

[amedeuce 10+ year member]

No one needs a well built sealed enclosure?

 

[amedeuce 10+ year member]

Might be the last time I bump this before I bring the hammer down on them.

 

[jnoel]

smash them and post pics

 

[jnoel]

and videos......

lol just playin...good luck with ur sale man

 

[amedeuce 10+ year member]

I'm warning everyone right now. This might be the last bump before you know what happens

 

[bloodhound50 10+ year member]

Dont different subs have different cut out diameters?

 

[amedeuce 10+ year member]

Dont different subs have different cut out diameters?

Most 12's are the same or close to it

 

[amedeuce 10+ year member]

besides you could always put a MDF ring over the hole or a whole new front baffle and cut out your own size. I would only try to make another size for like an 8" or 2 or a 10" these are typically too small for 15's and up.

 

[theothermike 10+ year member]

i have a lot of wiring assessories left over from my install

knu konceptz batt terms (pair)

inline 1/0 fuse holder w/ 250 amp fuse

6meters knu klarity rca's

some 4 gauge kollosus 5 ft or so.

some 16 gauge speaker kable 30 ft or so

a ground distro block

rca to mp3 jack cable if u wanted to hook up to headunit.

id probably be intrested in the bottum one the most

lmk if u intrested in any of the above.

the terminals are used for about 4 months, have covers and screws

fuseholder and fuse brand new never used

same with 4 gauge kable and speaker wire

ground block rcas and mp3 cable are used for 6 months

 

[EnvEe 02 10+ year member]

How much for shipping on the 3rd from the top to 11572?