I'm thinking about going a different route again. I'll never have a system because I keep changing my mind so let's just face it, I'll just be a buy and resell type of guy. Here we go. Shipping is only to the 48 states. HI and AL will be at much higher rates. As always, trades considered. This is what I have at the moment...
trio of old school RF he2 8's, dual 4 ohms and they are all in very good shape, cosmetically and mechanically - $150 plus ship
Crossfire xp6004, great condition both mechanically and cosmetically. One small ding is all i see. I'll take $170 shipped on this. The xp1000d got sold earlier today.
xp6004:
75 Watts RMS x 4 @ 4 Ohms @ 13.8V
300 Watts RMS x 2 @ 2 ohms @ 13.8V
Bridgeable 4 Channel Amplifier
Switcheable rear 6db boost at 55 hz.
Variable 12db HPF/LPF Crossover 50-500hz
Balanced Inputs
Input Sensitivity Multiplier Switch
Input Selector Switch (2ch/4ch)
RCA Pre-amp output
MOSFET power Supply
Nickel-Plated Connectors
Discrete Terminal Mount
5-Way Protection Circuit
Power/Protection Indicator
Cooling Fan
2 ohm stereo stable
S.M.D. Technology
8.6"W x 2.8"H x 15.75"L
Precision Power PC6600 chrome, I'd keep this just because it's in such great shape. All the plugs are included. The lettering has no signs of peeling, the chrome shines like it should. There are a couple of scratches on the top but nothing major, it's more like scuffs. Being a very detail oriented person, I'd rate this amp a 9 out of 10 cosmetically. Mechanically, it works great - $300 shipped
6 x 50W @ 4 ohms
6 x 100W @ 2 ohms
3 x 200W @ 4 ohms bridged
THD: 0.02% (4 ohms)
Freq. Response: 4.5Hz ∼ 100kHz (±0.5dB)
S/N Ratio: 110dB
Damping Factor: >500
Max. Current Draw: 100A
Fuse: External 80A
Dimensions: 19.75" x 8.98" x 2.24"
All at 12 volts!!!
Kicker zx1000.1, great shape again, mechanically and cosmetically. I don't have the birthsheet or box for this anymore but it was benched to do 1179 RMS from what I remember the birthsheet said. I'll take $230 shipped on this one.
4 ohms: 500 watts RMS x 1 channel
2 ohms: 1000 watts RMS x 1 channel
camera phone for the loss. My camera is acting up.
trio of old school RF he2 8's, dual 4 ohms and they are all in very good shape, cosmetically and mechanically - $150 plus ship
Crossfire xp6004, great condition both mechanically and cosmetically. One small ding is all i see. I'll take $170 shipped on this. The xp1000d got sold earlier today.
xp6004:
75 Watts RMS x 4 @ 4 Ohms @ 13.8V
300 Watts RMS x 2 @ 2 ohms @ 13.8V
Bridgeable 4 Channel Amplifier
Switcheable rear 6db boost at 55 hz.
Variable 12db HPF/LPF Crossover 50-500hz
Balanced Inputs
Input Sensitivity Multiplier Switch
Input Selector Switch (2ch/4ch)
RCA Pre-amp output
MOSFET power Supply
Nickel-Plated Connectors
Discrete Terminal Mount
5-Way Protection Circuit
Power/Protection Indicator
Cooling Fan
2 ohm stereo stable
S.M.D. Technology
8.6"W x 2.8"H x 15.75"L
Precision Power PC6600 chrome, I'd keep this just because it's in such great shape. All the plugs are included. The lettering has no signs of peeling, the chrome shines like it should. There are a couple of scratches on the top but nothing major, it's more like scuffs. Being a very detail oriented person, I'd rate this amp a 9 out of 10 cosmetically. Mechanically, it works great - $300 shipped
6 x 50W @ 4 ohms
6 x 100W @ 2 ohms
3 x 200W @ 4 ohms bridged
THD: 0.02% (4 ohms)
Freq. Response: 4.5Hz ∼ 100kHz (±0.5dB)
S/N Ratio: 110dB
Damping Factor: >500
Max. Current Draw: 100A
Fuse: External 80A
Dimensions: 19.75" x 8.98" x 2.24"
All at 12 volts!!!
Kicker zx1000.1, great shape again, mechanically and cosmetically. I don't have the birthsheet or box for this anymore but it was benched to do 1179 RMS from what I remember the birthsheet said. I'll take $230 shipped on this one.
4 ohms: 500 watts RMS x 1 channel
2 ohms: 1000 watts RMS x 1 channel
camera phone for the loss. My camera is acting up.
.
