I have a Precision Power PC4400.2 amp for sale.
This amp is in great cosmetic condition (one slight scratch under the letter 'C' in PC4400.2 on the front - See IMG_007 in briefcase below). When last used, the amp was in great working condition, too. It was powering a pair of JL Audio XR650Cs components and a pair of Infinity Kappa 6x9s in my old car. It has been shelved since September 2002 (when I sold my old car). I am selling it now as I don't have a need for it in the system I am planning for my current vehicle.
You can see more pictures of the amp at: http://briefcase.yahoo.com/benimal and select the folder named 'amplifier'.
The specs on the amp (per the manufacturer) are as follows:
QBASS Bass Boost
THD 0.02%
Input Topology: Differential
Input Sensitivity: 150mv - 12v RMS
Input Impedance: 10 kohms
Damping Factor: > 500
Slew Rate: > 50V/uS
Idle Current: 1.5 amps
Frequency Response: 4.5 Hz - 100 kHz
RMS Continuous Power:
50W x 4 @ 4 Ohms/ch
100W x 4 @ 2 Ohms /ch
200W x 2 @ 4 Ohms bridged
S/N Ratio (IHF A Weighted): 110 dBA
Dimensions: 8.9"
Dimensions: 2.25"
Dimensions: 13.72"
I do not provide a warranty on the amp, but will give the purchaser one week (from time of receipt) to check it out and make sure it is fully functional.
I'd like to get $200 for this amp, but price is somewhat negotiable. I will ship anywhere in the US or Canada, or you can pick it up if you are in Central Texas.
This amp is in great cosmetic condition (one slight scratch under the letter 'C' in PC4400.2 on the front - See IMG_007 in briefcase below). When last used, the amp was in great working condition, too. It was powering a pair of JL Audio XR650Cs components and a pair of Infinity Kappa 6x9s in my old car. It has been shelved since September 2002 (when I sold my old car). I am selling it now as I don't have a need for it in the system I am planning for my current vehicle.
You can see more pictures of the amp at: http://briefcase.yahoo.com/benimal and select the folder named 'amplifier'.
The specs on the amp (per the manufacturer) are as follows:
QBASS Bass Boost
THD 0.02%
Input Topology: Differential
Input Sensitivity: 150mv - 12v RMS
Input Impedance: 10 kohms
Damping Factor: > 500
Slew Rate: > 50V/uS
Idle Current: 1.5 amps
Frequency Response: 4.5 Hz - 100 kHz
RMS Continuous Power:
50W x 4 @ 4 Ohms/ch
100W x 4 @ 2 Ohms /ch
200W x 2 @ 4 Ohms bridged
S/N Ratio (IHF A Weighted): 110 dBA
Dimensions: 8.9"
Dimensions: 2.25"
Dimensions: 13.72"
I do not provide a warranty on the amp, but will give the purchaser one week (from time of receipt) to check it out and make sure it is fully functional.
I'd like to get $200 for this amp, but price is somewhat negotiable. I will ship anywhere in the US or Canada, or you can pick it up if you are in Central Texas.