Reply to thread

Message

<blockquote data-quote="benimal" data-source="post: 289369" data-attributes="member: 549470">I have a Precision Power PC4400.2 amp for sale.This amp is in great cosmetic condition (one slight scratch under the letter &#039;C&#039; in PC4400.2 on the front - See IMG_007 in briefcase below). When last used, the amp was in great working condition, too. It was powering a pair of JL Audio XR650Cs components and a pair of Infinity Kappa 6x9s in my old car. It has been shelved since September 2002 (when I sold my old car). I am selling it now as I don&#039;t have a need for it in the system I am planning for my current vehicle.You can see more pictures of the amp at: <a href="http://briefcase.yahoo.com/benimal" target="_blank">http://briefcase.yahoo.com/benimal</a> and select the folder named &#039;amplifier&#039;.The specs on the amp (per the manufacturer) are as follows:QBASS Bass BoostTHD 0.02%Input Topology: DifferentialInput Sensitivity: 150mv - 12v RMSInput Impedance: 10 kohmsDamping Factor: &amp;gt; 500Slew Rate: &amp;gt; 50V/uSIdle Current: 1.5 ampsFrequency Response: 4.5 Hz - 100 kHzRMS Continuous Power:50W x 4 @ 4 Ohms/ch100W x 4 @ 2 Ohms /ch200W x 2 @ 4 Ohms bridgedS/N Ratio (IHF A Weighted): 110 dBADimensions: 8.9&quot;Dimensions: 2.25&quot;Dimensions: 13.72&quot;I do not provide a warranty on the amp, but will give the purchaser one week (from time of receipt) to check it out and make sure it is fully functional.I&#039;d like to get $200 for this amp, but price is somewhat negotiable. I will ship anywhere in the US or Canada, or you can pick it up if you are in Central Texas.</blockquote>

[QUOTE="benimal, post: 289369, member: 549470"] I have a Precision Power PC4400.2 amp for sale. This amp is in great cosmetic condition (one slight scratch under the letter 'C' in PC4400.2 on the front - See IMG_007 in briefcase below). When last used, the amp was in great working condition, too. It was powering a pair of JL Audio XR650Cs components and a pair of Infinity Kappa 6x9s in my old car. It has been shelved since September 2002 (when I sold my old car). I am selling it now as I don't have a need for it in the system I am planning for my current vehicle. You can see more pictures of the amp at: [URL="http://briefcase.yahoo.com/benimal"]http://briefcase.yahoo.com/benimal[/URL] and select the folder named 'amplifier'. The specs on the amp (per the manufacturer) are as follows: QBASS Bass Boost THD 0.02% Input Topology: Differential Input Sensitivity: 150mv - 12v RMS Input Impedance: 10 kohms Damping Factor: > 500 Slew Rate: > 50V/uS Idle Current: 1.5 amps Frequency Response: 4.5 Hz - 100 kHz RMS Continuous Power: 50W x 4 @ 4 Ohms/ch 100W x 4 @ 2 Ohms /ch 200W x 2 @ 4 Ohms bridged S/N Ratio (IHF A Weighted): 110 dBA Dimensions: 8.9" Dimensions: 2.25" Dimensions: 13.72" I do not provide a warranty on the amp, but will give the purchaser one week (from time of receipt) to check it out and make sure it is fully functional. I'd like to get $200 for this amp, but price is somewhat negotiable. I will ship anywhere in the US or Canada, or you can pick it up if you are in Central Texas. [/QUOTE]

Verification