Sold FS: PDX4.100 - JL 12w6V2 - Deadener - Arc12

mattldm
10+ year member

Trying to get noticed
Rating: 0%
0 0 0
I have decided to sell a few things to clear up some space in the garage...

First up is an Alpine PDX 4.100. This amp is like new with original box, paperwork, and accessories. Birthsheet rated at 131 watts per channel!

(Note: the stacking feet, and mounting screws are not included)

IMG_0245.jpg


everything on the amp is 100% functional, it is like new.

IMG_0246.jpg


IMG_0247.jpg


IMG_0248.jpg


PDX4.100 - $240 shipped in the 48 states Pm for shipping to Alaska/Hawaii

Next is my JL audio 12W6v2... This sub hits hard, low and plays very loud with good SQ! The reason I am selling is that I want to replace it with a smaller sub to take up less space in my truck. The sub is in excellent condition with a couple light scratches on the cone but nothing that affects the sound. There is also a slight blemish on the magnet but again it does nothing to the sound. I have been running this with a PDX1.600 and it rocks!!!

IMG_0241.jpg


IMG_0244.jpg


The sub is currently mounted in a box that I built for it. The box is 1.29ft^3 gross and 1.22ft^3 net after the sub displacement. The box is built from .75" MDF, glued, nailed. stuffed with 1lb Acousta-stuff polyfill and covered with parts-express charcoal carpet. The box is 22.5W x 14H x 10D. I will sell the sub together or separately and will also sell the box by itself if someone wants just the sub.

JL 12W6v2 - $210 plus actual shipping

Box - $25 plus actual shipping

Both box and sub together - $225 plus actual shipping

I have 13' of a roll of Raamat = 18ft^2 (this is a little more than 1/4 of a roll) ($30 plus shipping)

I also have 4 sheets of Second skin Damplifier (8ft^2 total) each sheet is 2 square feet. ($20 plus shipping)

IMG_0256.jpg


IMG_0258.jpg


If somebody buys Both raamat and Damp together i'll do it for $45 plus actual shipping.

Also for sale NON WORKING Arc Audio ARC12d2 sub. The motor/magnet of this sub has shifted and is causing the voicecoil to bind up. The cone will not move unless it is forced. I attempted to realign the magnets and was unsuccessful. I spoke to Arc about this and they said that the sub MAY be repairable, but it may not!!!

This is one outstanding SQ sub!!!

Make me an offer!! ill consider anything, $15 plus shipping to start?

IMG_0255.jpg


If you have any questions feel free to ask...

There are only three things that I will consider trades for:

DLS Iridium 12i sub

Image Dynamics IDQ12 - version 3 only

Arc Audio ARC12 - one that works, lol! :p

Thanks

 
how would you compare the Arc 12 to the W6v2. Just curious.
I was only able to compare them for a short period. I actually replaced the Arc with the JL due to the issues that I was having with the Arc...

However if I had to compare the two I would say that the JL had slightly more output with a tad more "punch" to the bass, but the Arc seemed to play a little lower and had slightly more tonality. Kick drum on the JL was better but bass guitar on the Arc was better... if that makes sense...

Both are nice subs, it depends on what you are looking for.

 
trade the dub6 for a diamond audio TDX 12 D2?
No thanks, Ill pass on the Diamond... but you can still buy the W6 if you want, lol //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

mattldm

10+ year member
Trying to get noticed
Thread starter
mattldm
Joined
Location
So Cal
Start date
Participants
Who Replied
Replies
39
Views
2,773
Last reply date
Last reply from
phantom240
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top