I have a Power Acoustik A2400db for sale. One of the very few power acoustik amps that did close to what they were rated at. IMO its a great amp served me well with no problems what so ever. You get the amp and bass control knob I dont know where the cord that connects the bass knob to the amp but whatever it looks like a plain telephone cord (correct me if im wrong but thats exactly what it looks like)
anyway here are the details
Number of Channels 1 - Mono
RMS Power (4 ohms) 900 watts x 1 channel
RMS Power (2 ohms) 1400 watts x 1 channel
RMS Power (1 ohm) 1800 watts x 1 channel
Bridged RMS Power Not Bridgeable
Total RMS Power Output 1800 watts
Total Peak Power Output 2400 watts
Maximum Input Gauge Size 4
Minimum Impedance Unbridged 1 ohm
Minimum Impedance Bridged Not Bridgeable
THD at Rated RMS Power 0.50%
Speaker Level Inputs Yes
Preamp Outputs 1 pair
Built-in Crossover N/A
High-Pass Crossover Frequency N/A
Low-Pass Crossover Frequency 50 - 150 Hz
Subsonic Filter N/A
Signal-to-Noise Ratio 100 dB
Channel Separation N/A
Bass Boost 0 - 18 dB
Bass/Gain Remote Yes
Fan Cooled N/A
Fuse Rating 30A x 4
http://www.sonicelectronix.com/item_6190_Power+Acoustik+A2400DB.html
edit: pics are up Mechanically its a 10/10 cosmetically id give it an 7/10 it has been laying around in my garage so I need to clean it up and dust if off has a few scratches on the front and alot on the back. I guarantee it will not be DOA or refund.
Im looking to get 140 shipped anywhere in the continental us. im pretty firm on the price look around on the forum no one has sold a perfectly working one this cheap.
this is a first come first serve basis! I will not hold the amp for anyone, whoever has the money to me first takes it.
pics are huge and i dont think the forum resizes so theyre all thumbnails click on each picture to expand and click on the image to zoom in on certain areas so you can see where the scratches are on the back.
not a heavy scratch at all just paint
battery wire is not included couldnt find my hex key to remove them
EDIT: FORGOT TO ADD one of the speaker screws is missing ran away in my car somewhere so youll have to go to lowes and buy a screw so plan on being set back like 10 cents
It needs to be cleaned with a q-tip inbetween the ridges but I dont have any so sorry but buyer has to //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I know bad seller tactic but im cleaning out my garage and just want it gone.
any questions just pm me
anyway here are the details
Number of Channels 1 - Mono
RMS Power (4 ohms) 900 watts x 1 channel
RMS Power (2 ohms) 1400 watts x 1 channel
RMS Power (1 ohm) 1800 watts x 1 channel
Bridged RMS Power Not Bridgeable
Total RMS Power Output 1800 watts
Total Peak Power Output 2400 watts
Maximum Input Gauge Size 4
Minimum Impedance Unbridged 1 ohm
Minimum Impedance Bridged Not Bridgeable
THD at Rated RMS Power 0.50%
Speaker Level Inputs Yes
Preamp Outputs 1 pair
Built-in Crossover N/A
High-Pass Crossover Frequency N/A
Low-Pass Crossover Frequency 50 - 150 Hz
Subsonic Filter N/A
Signal-to-Noise Ratio 100 dB
Channel Separation N/A
Bass Boost 0 - 18 dB
Bass/Gain Remote Yes
Fan Cooled N/A
Fuse Rating 30A x 4
http://www.sonicelectronix.com/item_6190_Power+Acoustik+A2400DB.html
edit: pics are up Mechanically its a 10/10 cosmetically id give it an 7/10 it has been laying around in my garage so I need to clean it up and dust if off has a few scratches on the front and alot on the back. I guarantee it will not be DOA or refund.
Im looking to get 140 shipped anywhere in the continental us. im pretty firm on the price look around on the forum no one has sold a perfectly working one this cheap.
this is a first come first serve basis! I will not hold the amp for anyone, whoever has the money to me first takes it.
pics are huge and i dont think the forum resizes so theyre all thumbnails click on each picture to expand and click on the image to zoom in on certain areas so you can see where the scratches are on the back.
not a heavy scratch at all just paint
battery wire is not included couldnt find my hex key to remove them
EDIT: FORGOT TO ADD one of the speaker screws is missing ran away in my car somewhere so youll have to go to lowes and buy a screw so plan on being set back like 10 cents
It needs to be cleaned with a q-tip inbetween the ridges but I dont have any so sorry but buyer has to //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I know bad seller tactic but im cleaning out my garage and just want it gone.
any questions just pm me
