Sold FS: Mint SounDigital SD8000

us3
10+ year member

CarAudio.com Elite
Rating: 100%
13 0 0
Hi

I bought this amp new from Murilo at SounDigital. (great guy to deal with) The only reason I'm offering this amp is to buy smaller SD amps to try. (still keeping one of these)

I have lightly used this amp on a short daily commute for about a month and a half now and have power tested it one time. It's never been mounted and still looks and works like new. Part of the sticker came off but I'll send it along to be put back on.

It will arrive exactly as shown, I just took these pics as I was packaging it for shipping. After testing several high power amps, the SD8000 amp and SounDigital company were above the rest in several ways. (size, power, imp, stays cool, good people)

I paid a high price for this amp so I'll be Taking THE BEST OFFER but I'll ask $1350 Shipped Insured with very secure double packaging. (will not sell for 1000, sorry)

Please email, post or pm for any offers or questions

Thanks, Matt

k80.jpg


k81.jpg


k82.jpg


k83.jpg


k84.jpg


k85.jpg


k86.jpg


 
Here are the Spec's from the manual:

-8000WRMS @ 12,6v

-6400WRMS with twice the nominal impedance

-Maximum consumption = 1000A

-FA (damping factor) = 200 @ 1 ohm

-Operating frequency = 20 to 8 KHz

-Subsonic variable filter = 20 to 50 Hz

-Low pass variable filter = 80 to 8 KHz

-Input sensibility - 0,5v - 6v

-THD

-Totally Microcontrolled Ampifier

-Clipping Indicating LED

-Discharged Battery Indicating LED

-ESM - Energy Saving Mode

-High-Current Connectors

-Nickel-Plated Connectors

-Soft-Start and Soft-Stop

-Ultra-Low Noise SMPS

-Internal Cooler with actuation only above 104F

-Dimentions: 17.32" Length x 10.9" width x 2.87" Height

-Weight: 24.25 lbs

 
Here are the Spec's from the manual:
-8000WRMS @ 12,6v

-6400WRMS with twice the nominal impedance

-Maximum consumption = 1000A

-FA (damping factor) = 200 @ 1 ohm

-Operating frequency = 20 to 8 KHz

-Subsonic variable filter = 20 to 50 Hz

-Low pass variable filter = 80 to 8 KHz

-Input sensibility - 0,5v - 6v

-THD

-Totally Microcontrolled Ampifier

-Clipping Indicating LED

-Discharged Battery Indicating LED

-ESM - Energy Saving Mode

-High-Current Connectors

-Nickel-Plated Connectors

-Soft-Start and Soft-Stop

-Ultra-Low Noise SMPS

-Internal Cooler with actuation only above 104F

-Dimentions: 17.32" Length x 10.9" width x 2.87" Height

-Weight: 24.25 lbs
through a single set of 1/0 inputs? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

bump for a bad azz amp, but this still has me puzzled

 
through a single set of 1/0 inputs? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

bump for a bad azz amp, but this still has me puzzled


X2... input sensitivity only goes to 6v... I thought 8 was pretty much standard now.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

us3

10+ year member
CarAudio.com Elite
Thread starter
us3
Joined
Location
San Diego
Start date
Participants
Who Replied
Replies
29
Views
2,396
Last reply date
Last reply from
us3
20260423_214720.jpg

BP1Fanatic

    May 14, 2026
  • 0
  • 0
20260419_124349.jpg

BP1Fanatic

    May 14, 2026
  • 0
  • 0

New threads

Top