Im Selling this amp for a friend who recently upgraded to a bigger amp.....it was set on a amp rack and barely has any scratches on it.....i would rate it a 8.5 out of 10....and that is being picky......well he only wants $70 plus any shipping charges......i have never used this amp personally i just know that it was working when it was pulled out of his car...if you have any questions pm and i will get back to you when i get intouch with him.....im just trying to help him out since this site has alot of traffic.....
# 1 x 400W RMS @ 4 OHMS
# 1 x 800W RMS @ 2 OHMS
# 1 x 1000W RMS @ 1.3 OHMS
# 1 x 2000W @ 1.3 OHMS
# 1 x 4000W Bridged Max Power @ 2 OHMS
# Mono Block Subwoofer Amplifier
# 1 Ohm Stable
# MOSFET Power Supply
# PWM(Pulse-Width-Modulated) System
# Glass Epoxy PCB With SMD Technology
# Gold plated RCA Inputs
# Custom Terminal Block for Speaker Connections
# Thermal, Overload Short Protection
# Variable Subsonic Filter(15Hz~40Hz,24dB/Octave)
# Phase Control 0-180 degree
# Input Impedance:10K Ohms
# Soft Turn On/Off
# Heavy Duty Power Coated Heatsink
# THD: 0.1%
# S/N RATIO: 90dB
# Input Sensitivity: 200mv~8V
# Freq. Response: 10Hz~150KHz
# Remote Bass Control
# Fuse: 30A x 4
# Dimensions: 9.82''(W) x 2.34''(H) x 15.16''(L)
# 1 x 400W RMS @ 4 OHMS
# 1 x 800W RMS @ 2 OHMS
# 1 x 1000W RMS @ 1.3 OHMS
# 1 x 2000W @ 1.3 OHMS
# 1 x 4000W Bridged Max Power @ 2 OHMS
# Mono Block Subwoofer Amplifier
# 1 Ohm Stable
# MOSFET Power Supply
# PWM(Pulse-Width-Modulated) System
# Glass Epoxy PCB With SMD Technology
# Gold plated RCA Inputs
# Custom Terminal Block for Speaker Connections
# Thermal, Overload Short Protection
# Variable Subsonic Filter(15Hz~40Hz,24dB/Octave)
# Phase Control 0-180 degree
# Input Impedance:10K Ohms
# Soft Turn On/Off
# Heavy Duty Power Coated Heatsink
# THD: 0.1%
# S/N RATIO: 90dB
# Input Sensitivity: 200mv~8V
# Freq. Response: 10Hz~150KHz
# Remote Bass Control
# Fuse: 30A x 4
# Dimensions: 9.82''(W) x 2.34''(H) x 15.16''(L)
